User's Manual

Page33 / 35
█ Troubleshooting
What is happening
What you should do
The meter does NOT work after the
blood is applied.
 Make sure that the test strip is insert into the test strip slot
completely.
 See if the test strip is covered in debris or lint.
 Make sure the blood is applied to the test strip correctly.
 Make sure the test strip is inserted correctly and repeat the test.
The test result is abnormal.
 See if the test strip is covered in debris or lint.
 Check if the test strip is within the validity period.
 Make sure the test strip has NOT been stored out of its vial.
 Make sure the test strip has NOT been used before.
 Make sure the code on the meter display matches with the test
strip code.
The thermometer symbol appears
on the screen.
 Put the meter and test strips in a location within the operating
temperature range (10 ~ 40℃) for at least twenty (20) minutes
and repeat the test. Do NOT raise or lower the meter
temperature artificially.
 If the thermometer symbol is constantly showing, contact
Customer Service.
The meter does NOT work after the
test strip is inserted.
 Make sure the test strip is completely inserted into the test strip
port.
 Make sure the batteries are inserted correctly, with the + sign
facing upwards.
14. System Specifications
Measuring Range (Glucose)
20 ~ 600 mg/dL
Measuring Range (β-ketone)
0.1 ~ 8.0 mmol/L
Measuring Time (Glucose)
6 seconds
Measuring Time (β-ketone)
8 seconds
Memory capacity
500 test results (include date and time)
Sample Type (Glucose)
Fresh capillary and venous whole blood
Sample Type (β-ketone)
Fresh capillary(only fingertip) and venous whole blood
Operating condition
10 ~ 40℃
Sample volume
0.5 ㎕
Screen type
Backlight LCD
Dimensions (mm)
90 (L) x 53 (W) x 18 (H)
Weight
Approximately 52g (with batteries)
Power supply
DC 3V (CR2032) Lithium Battery
Data Output
Bluetooth, USB Data Transfer Cable
Wireless Frequency
2.4 GHz Band