User's Manual

Page29 / 35
9. Displaying Stored Test Results
The Medisign MediKeto Plus 82 BT blood glucose and β-ketone meter automatically stores up to five hundred
(500) glucose and β-ketone test results together with the date and time. The meter also provides a seven (7),
fourteen (14), thirty (30) days average to help track a patient’s blood glucose trend. The time and date must be
set in order to use the memory and day averaging function (See Set Date and Time).
Display of Test Results
For the blood glucose test
For the blood β-ketone test
1. Begin with the meter turned off. Press the button, you will hear a beep sound and the meter will
turn on.
2. The screen will display the date and time. After two (2) seconds, the average blood glucose test result
of last seven (7) days will be displayed with a sign and the number of test results for seven (7)
days on the display. For example, 8n above the picture means that there are eight (8) test results saved
on the memory during the last seven (7) days. Each time pressing the < button, fourteen (14) days and
thirty (30) days average result will be displayed.
3. The latest test result is displayed first when you press the > button while the seven (7) days’ average is
on the screen.
4. Each time you continue to press the > button, the screen will show the test result from the most recent
to the oldest. Use the < or > button to switch stored results.
NOTE:
Control solution and blood β-ketone test results will NOT be included in the seven (7), fourteen (14),
thirty (30) days’ average calculation.
After five hundred (500) data entries, every new test results replaces the oldest (first in, first out).
Meter memory test results and day averages will NOT be erased when battery is removed.
The Meter will automatically turn off after two (2) minutes of non-use.