User's Manual

Page21 / 35
█ Applying Blood
Place your finger on the tip of the test strip. Ensure that the blood is NOT applied from above.
The measurement chamber of the test strip draws the blood of your finger automatically. Your finger should
remain still until the measuring chamber is completely filled and you hear the “beep” sound.
IMPORTANT
█ Measuring Process
After six (6) seconds you will hear a second beep sound and your test result will be displayed on the LCD screen.
The Test result will be stored in meter memory automatically (See Viewing the Meter Memory).
█ Flagging Test Results
If you want to flag pre-meal, post-meal or control solution results, press the < or > button after you finish the
test. The symbol for post-meal will be displayed on your screen. Press the < or > button to toggle between
pre-meal , post-meal and control solution symbol. Remove the test strip to store the test result with the
flag which is displayed on the screen.
• The sample channel at the end of the test strip should show full. When you hear the beep sound, you have
enough blood in the test strip.
• Do NOT put urine on the test strip.
• Do NOT touch sampling end of the test strip.
• Do NOT smear the blood with sampling end of the test strip.
• Do NOT drop the blood directly on the sampling end of the test strip.
• Do NOT add or apply a second drop of blood. This may cause a false result.
• Do NOT hold or shake the meter while it is testing.