User's Manual

Page15 / 35
█ Acoustic Signal
Acoustic signals ( ) are activated by default. If you want to deactivate the acoustic signals, press the < or >
button to change the status from ON (activated) to OFF (deactivated). Confirm your choice with the button.
NOTE: Turning the beep sound on or off do NOT affect your blood glucose or blood β-ketone measurements.
█ Delete Test Results
You have the option to delete the entire test results from meter memory. You will see dEL flashing on the screen.
Press the < or > button to choose between YES (delete all test results) or NO (keep all test results).
Confirm your choice with the button.
█ Exit Settings
Press button for three (3) seconds to exit settings. No matter which steps the meter is set to, it will store the
most recent setting and switches off.
NOTE: You can start testing by inserting a test strip at any step.