User's Manual

Page14 / 35
2. Settings
█ Inserting (or Replacing) the Batteries
The batteries need to be inserted before using your Medisign MediKeto Plus 82 BT blood glucose and β-ketone
meter for the first time or when the batteries are low. When the batteries are low the screen will display and
blink the on the bottom of the screen. It will be continuously shown until the meter becomes unusable due
to low battery.
1. Open the battery compartment cover on the back of the meter.
2. Insert new batteries, with the (+) side facing up.
3. Replace the compartment cover back onto the meter.
CAUTION
IMPORTANT
NOTE:
 The meter can also be used with a single battery. If you install two (2) batteries, you can use it for a
longer period.
 Whenever replacing the batteries, you need to reset the current date and time. However, test results
stored will NOT be deleted.
█ Set Date and Time
Press the button to set the month, date, hours, minutes and year on after another. With the < or > button you
can change the flashing value.
• Dispose of used batteries according to local regulations.
• If the meter is NOT to be used for a long time, remove the battery to eliminate the risk of battery
leakage.
• Risk of explosion if battery is replaced by an incorrect type.
• Small items such as the battery cover and batteries are choking hazards.