User's Manual

Page13 / 35
IMPORTANT
█ Medisign GH Glucose Control Solution
The Medisign GH Glucose Control Solution is the standard glucose concentration solution required to perform a
control test (See Control Solution Testing).
The Medisign GH Glucose Control Solution helps to validate the performance of the system. Run the control
test to make sure the meter and test strips are working properly together, to practice testing procedure, and when
using a new package of the Medisign GH82 blood glucose test strips.
█ Medisign Ketone Control Solution
The Medisign Ketone Control Solution is the standard blood β-ketone concentration solution required to
perform a control test (See Control Solution Testing).
The Medisign Ketone Control Solution helps to validate the performance of the system. Run the control test to
make sure the meter and test strips are working properly together, to practice testing procedure and when using a
new package of the Medisign MediKeto 82 blood β-ketone test strips.
█ Medisign Check Strip
The Medisign GH Check Strip and the Medisign Ketone Check Strip verifies whether the Medisign MediKeto
Plus 82 BT blood glucose and β-ketone meter is working properly.
• The Medisign MediKeto Plus 82 BT blood glucose and β-ketone meter should be used with the
Medisign GH82 blood glucose test strips and MediKeto 82 blood β-ketone test strips.
• Before using, please check the test strip expiration date on the vial or the foil packet.
• The Medisign GH82 test strips in the vial are good six (6) months after first opening date or until the
expiration date, whichever comes first.
• The Medisign MediKeto 82 test strips in the vial are good three (3) months after first opening date or
until the expiration date, whichever comes first.
• Record the discard date on the test strip vial and discard any unused test strip after that date.
• You should use your test strip immediately after retrieving it from its vial or foil packet.
• Always keep the test strip vial closed immediately after retrieving the test strip.
• Store the test strips in the original vial between 4 ~ 30℃, at indoor area.
• Keep the test strip away from the heat and direct sunlight. Do NOT freeze.
• The test strip may be stored in a refrigerator between 4 ~ 8℃. But it must be brought to room
temperature before using.
• Do NOT test if there is condensation (water build-up) on your meter and the test strip vial or the foil
packet. Move your meter or a test strip vial or a foil packet to a cool, dry spot. Wait for the meter and a
test strip vial or a foil packet surface to dry before testing.
• Do NOT handle the test strips with wet or dirty hands.