User's Manual

Page11 / 35
█ Meter Display Screen
1
Appears when the Medisign MediKeto 82 blood β-ketone test
strip is inserted
2
Appears when your blood glucose result is equal to or higher
than 240 mg/dL
3
Symbol to mark pre-meal or post-meal test results.
4
Symbol to mark the control solution test results
5
Appears when the meter pairs with a mobile device
6
Appears when the sound is set to OFF
7
Appears if the meter is out of operating temperature range
8
Appears when blood glucose test result falls in 80-120 mg/dL
9
Segments to display the Set-up mode
10
Appears when the meter is ready for application of blood or
control solution.
11
Appears when test strip is inserted.
Blinks when test strip is removed during the meter is on.
12
Appears when test results stored in memory are displayed
13
Segments to display date and average day
14
Appears when average result is displayed
15
Segments to display hour and minute of tests
16
Segments to display the unit of measurement
17
Appears when the meter detects low battery power
18
Segments to display test results or error messages
IMPORTANT
Be sure to check the blood glucose and blood β-ketone measurement unit on the meter before the test. Use of
the wrong blood glucose and blood β-ketone measurement unit may cause you to misinterpret the test results
and result in incorrect treatment. Consult your healthcare professional if you have any questions about your
blood glucose and blood β-ketone measurement units.