Operation Manual
22 Activity Tracker ViFit connect MX3
Flight mode
Bluetooth® will be active for some seconds with each press
on the function button
2
. There is a possibility to switch
the tracker into a ight mode, in which Bluetooth® is com-
pletely deactivated and your steps will not be captured. To
activate the ight mode, press and hold function button
2
for approx. 6 seconds. The following symbols appear in the
display:
Afterwards, a display similar to the following example appe-
ars on the activity tracker:
To exit ight mode, press and hold the function button
2
again for approx. 3 seconds.
The activation and the de-activation of ight mode will be
conrmed by a short vibration.
Activated ight mode