Instruction manual
19
GB
3 Operating
Spot massage button
(▲▼)
Switch on the device by pressing On/Off button
.
Only under shiatsu state spot
massage for back will response. Activate the Shiatsu function state by pressing
the Shiatsu massage button
. Massage heads rotate in a spot. Pressing and
holding the spot massage button
changes position of massage heads upward
or downward. Press ▲ or ▼ until the desired position is reached and loose the
button
.
Press button
again to de-activate the spot massage function and
return to Shiatsu state.
Rolling massage button
Switch on the device by pressing On/Off button
.
Activate the Rolling
massage function by pressing the Rolling massage button
.
Select the region
you wish to massage with the back massage button
(
/
/
).
Lower button
(lower back)
The massage rolls
travel up and down the lower half of the back. The
reversal of the direction takes place when the respective end positions are
reached.
Upper button
(upper back)
The massage rolls
travel up and down the upper half of the back. The
reversal of the direction takes place when the respective end positions are
reached.
Full button
(full back)
The massage rolls
move from the “Park” position at the base of the
backrest, up to the shoulder area, massaging the back whilst doing so. Once
the uppermost position has been reached, the direction of the massaging rolls
is reversed. The heads then travel down to the base of the backrest. Once the
heads reach this point, the direction is reversed again and then travel up the
back again.
Press the button
again to de-activate the rolling massage function;
Width button
()
This button is effective only in the rolling massage state. Press the rolling
massage button
to activate the rolling massage function.
Pressing and holding the width button
, the distance between the rolls
increases or decreases until the desired width is reached and you loose the button
.
▼
▼
MC_820/88938_WEST_Final_25.06.qxd:Massagesitz mit Nackenmassage 27.06.2012 13:51 Uhr Seite