Instruction manual

Safety Connecting Operation Help Appendix
After Sales Support TEL: [phone] WEB Support: www.medion.com.au
19
Connecting Speakers/Audio Output
Diagram reference: L
Here you can connect your active speakers for playback of sound or audio connection
cables for recording. Please refer to the user's guide of your stereo installation for informa-
tion about which connector you should use (usually Line In or Aux).
1. Connect the cable with the 3.5 mm stereo jack plug into the green socket marked
with the symbol
.
Note
You can also connect a sound system to the audio socket. For further infor-
mation, read the section beginning on page 42.
A digital output (S/PDIF) can be linked with a coaxial cable.
Diagram reference: D
1. Plug a cinch cable into the socket at Position D.
2. Connect the other end of the cable to an audio device with a corresponding digital
gateway.
You can also connect headphones to the analogue audio gateway.
Diagram reference: L
 Connect the cable with the 3.5 mm stereo jack plug in the green socket.
Caution!
The use of headphones/earphones with a high volume can lead to lasting
damage to your hearing. Set the volume to the lowest level before playing
back and any sound. Start play back and increase the volume to the level
that is comfortable for you. Changing the basic settings of the equalizer can
also cause damage to the hearing of the listener.
It can cause damage to the hearing ability of the
listener if a device is operated through earphones with an
increased volume for a long period.