MEDION-Navigator 4.4 User's manual MEDION-Navigator 4.
Impressum MEDION AG Gänsemarkt 16-18 D-45127 Essen Hotline: +44 (0)870-7 27 03 70 The information contained herein may be changed at any time without prior notification. This manual nor any parts thereof may not be reproduced for any purpose whatsoever without the express written consent of MEDION AG, nor transmitted in any form either electronically or mechanically, including photocopying and recording. Copyright 2005, MEDION AG All rights reserved.
MEDION-Navigator 4.4 Table of contents 1 2 Introduction................................................................ 3 1.1 Important safety information ................................... 4 1.1.1 Safety information on navigation .............................. 4 1.1.2 Safety information on handling MEDION-Navigator ..... 5 1.1.3 Safety information on the installation in the vehicle..... 5 1.2 Search facilities and conventions .............................. 6 1.3 Liability .........................
MEDION-Navigator 4.4 5 Appendix................................................................... 69 5.1 Configuration of MEDION-Navigator ........................ 70 5.1.1 Map information................................................... 70 5.1.2 Route information ................................................ 71 5.1.3 Volume............................................................... 71 5.1.4 Representation .................................................... 72 5.1.5 Touch screen calibration...
MEDION-Navigator 4.4 1 Introduction Topics covered in this chapter: 1.1 Important safety information page 4 Safety information on navigation Safety information on handling MEDION-Navigator Safety information on the installation in the vehicle 1.2 Search facilities and conventions page 6 1.3 Liability page 6 1.
MEDION-Navigator 4.4 1.1 Important safety information Note 1.1.1 In your own interest, read the following notices and safety information carefully before starting up your navigation system. Safety information on navigation Use of MEDION-Navigator is executed at your our risk. Caution: To protect yourself and others from accidents, do not program the navigation system while driving.
MEDION-Navigator 4.4 1.1.2 Safety information on handling MEDION-Navigator Caution: As it is not waterproof, do not expose your GPS receiver to water! For example, protect it from rain, snow or hail when you are on your way by bike or on foot. Caution: MEDION-Navigator should be disconnected from power supply while your car is parking. As its internal GPS receiver spends energy permanently you might risk discharging the car battery. Note: Do not use any harsh solvents for cleaning MEDION-Navigator.
MEDION-Navigator 4.4 1.2 Search facilities and conventions Find information quickly This manual offers the following search facilities: In the footnote at the bottom of the page, you may check which chapter and which section you are actually reading. A glossary at the end of the manual contains explanations on the technical terms used in this manual. An index at the end of the manual allows precise search for the information contained in this manual.
MEDION-Navigator 4.4 1.3.1 Support Support Great Britain Medion Electronics Ltd. 120 Faraday Park Faraday Road Dorcan Swindon SN3 5JF Wilts Call our support staff for Telephone support: Mondays to Fridays 8am to 8pm Saturdays, Sundays 10am to 4pm +44 (0)870-7 27 03 70 Or call our Fax support: +44 (0)1793-71 57 16 Or send us an email: hotline@medion.co.
MEDION-Navigator 4.4 Support Denmark Medion Service Center Meterbuen 6 - 12, Bygning 8 2740 Skovlunde Call our support staff for Telephone support Mondays to sundays from 8.30am to 10pm 70 20 42 33 Or call our Fax support: 44 84 00 41 Or send us an email: hotline@compare-support.dk Support Finland Medion Service Center InfoCare Finland Oy AB Sorvaajankatu 15, 2 krs Fin-00880 Helsinki Call our support staff for Telephone support: Mondays to Fridays from 8.
MEDION-Navigator 4.4 Support Germany Medion Service Center c/o EMTS Laboratories GmbH Rheinmetallstraße 18a D-99610 Sömmerda Call our support staff for Telephone support: Mondays to Fridays from 7am to 11pm Saturdays, Sundays, and holidays from 10am to 6pm +49 (0)1805-63 34 66 Or call our Fax support: +49 (0)1805-65 46 54 Or send us an email: pc-support@medion.
MEDION-Navigator 4.4 Support Norway Medion Service Center Compare Support A/S Olaf Helsetsvei 1 N-0694 Oslo Call our support staff for Telephone support: Mondays to Fridays from 8.30am to 10pm 21 50 27 20 Or call our Fax support: 21 50 27 21 Or send us an email: norway@compare-support.dk Support Portugal Medion Service Center Luma Rua Alfredo Guisado no.
MEDION-Navigator 4.4 Support Sweden MEDION Service Center Compare Support AB Box 1843 Gottorpsgatan 11 S-581 17 Linköping Call our support staff for Telephone support: Mondays to Fridays from 8.30am to 10pm 031 799 99 97 Or call our Fax support: 031 799 99 98 Or send us an email: sweden@compare-support.dk Support Switzerland MEDION Service Lerzenstrasse 10 8953 Dietikon Switzerland Call our support staff for Telephone support: available 24/7 0848 - 33 33 32 1.
MEDION-Navigator 4.4 2 Installation and quick-start guide Topics covered in this chapter: 2.1 Operating mode of your navigation system page 14 2.
MEDION-Navigator 4.4 2.1 Operating mode of your navigation system MEDION-Navigator The time of complicated and frustrating inquiries on the right way in folded maps is over. From now on MEDION-Navigator, your navigation system, will guide you, based on satellite information, quickly and safely to your destination. GPS-based navigation The Global Positioning System (GPS) has originally been developed in the 70ies, as a weapon guidance system for the American forces.
MEDION-Navigator 4.4 2.2 2.2.1 Installation of the navigation system Inserting the memory card into the device Insert the memory card into the device… Before using MEDION-Navigator you must insert the memory card containing the cartographic data into the device. 1. Unpack the memory card carefully. Pay attention not to touch contacts and not to make them dirty. as shown below (label up, cut 2. Hold the memory card corner bottom right). Insert the memory card into the at the left of the device.
MEDION-Navigator 4.4 Note: Depending on the battery charging state, it may happen that you have to charge the device for a while before the installation may be executed. 2.2.3 Restoring the files of the memory card Survey In case you have lost or damaged the provided memory card, you will find all files, which are necessary for restore on your MEDION-Navigator-CD-ROM 1. You will need a PC for restoring the files. You may transmit the files via an ActiveSync connection or via a card reader.
MEDION-Navigator 4.4 2.2.4 Installation in the vehicle Caution: The mounted holder must not impede the driver’s attention on the traffic. If this is not possible, mount the holder somewhere else so that safe driving is granted. In case this is not possible, use the provided adhesion plate to mount the holder somewhere else so that safe driving is granted. Note: You need not execute steps 1 and 2 if you want to mount the holder on your windscreen. Mounting the holder... 1.
MEDION-Navigator 4.4 7. Insert the power jack 2.2.5 into the cigarette lighter. Fitting MEDION-Navigator on your bike Mount the fitting... 1. Connect the clamp and the mounting plate . Pull the clamp round the handle bar as represented above (opening up, plate towards the driver). Do not forget to put the rubber band , which is included in the delivery between the handle bar and the clamp. The clamp is flexible, so you can open it carefully, place it round the handle bar and close it.
MEDION-Navigator 4.4 4. Insert the device into its cradle. Verify that the clip snaps noticeably! 5. Turn the holder until you may read the screen well while sitting on the bike. 6. Fasten the screw.
MEDION-Navigator 4.4 2.2.6 Starting navigation Use your navigation system… 1. Turn on your MEDION-Navigator. At each start of MEDION-Navigator, the following message appears: 2. Tap the I accept button. If you do not accept and if you tap the I refuse button, the device turns off. The MAIN SCREEN appears. 3. Tap the One destination button to enter your destination.
MEDION-Navigator 4.4 4. Tap the Country entry field and select the destination country. 5. Tap the Address button. The ADDRESS screen opens: 6. Enter the name of the destination town into the Town field. 7. Enter the name of the destination street into the Street field. Enter the house number if possible. 8. Tap the Start navigation button.
MEDION-Navigator 4.4 3 Operating the navigation software Topics covered in this chapter: 3.1 Starting MEDION-Navigator page 24 Basic settings 3.2 User interface and basic functionality page 29 Icons 3.3 Indicating destinations page 32 Entering a destination manually Selecting a Point of Interest Indicating destinations on the map Saved destinations Recent destinations Save and use your home address 3.
MEDION-Navigator 4.4 3.1 Starting MEDION-Navigator Precondition You have carried out installation and activation of MEDIONNavigator as described in “Installation of the navigation system”, page 15. Starting the navigation software… 1. Turn on your MEDION-Navigator. At each start of MEDION-Navigator, the following message appears: 2. Tap the I accept button. If you do not accept and if you tap the I refuse button, the device turns off. The MAIN SCREEN appears.
MEDION-Navigator 4.4 One destination Tap the One destination button to indicate a destination for navigation (one stage). For details, please refer to “Indicating destinations”, page 32. Navigate homewards Tap the Home button to navigate to your home address. For details, please refer to “Save and use your home address”, page 45. Several destinations Tap the Several destinations button for itinerary planning purposes.
MEDION-Navigator 4.4 3.1.1 Basic settings Basic settings Before working with MEDION-Navigator, we recommend indicating the time zone of the region you are staying in currently so that the system can indicate correct times of arrival in navigation mode, entering the home address. You may then navigate home from anywhere. Indicate the time zone 1. On the MAIN SCREEN, tap Settings. The SETTINGS screen opens. 2. Via the arrow buttons, select the TIME ZONE screen. 3. Tap into the Time zone entry filed.
MEDION-Navigator 4.4 5. Tap Ok. 6. If there is currently daylight saving time, tap the Daylight saving time entry field. The entry switches to Yes. Saving your home address In MEDION-Navigator, you may save your home address to quickly start navigation homewards from anywhere. 1. On the MAIN SCREEN, tap Settings. The SETTINGS screen opens. 2. Via the arrow buttons, select the HOME ADDRESS screen. 3. Tap Enter your home address. The DESTINATION screen opens.
MEDION-Navigator 4.4 4. Tap the Address button and enter your home address as described in “Entering a destination manually”, page 33. 5. Tap the Set as home address button. The address is indicated on the HOME ADDRESS screen. 6. Tap Save.
MEDION-Navigator 4.4 3.2 User interface and basic functionality Operation In order to offer a maximum of flexibility and convenience for the operation of MEDION-Navigator there is three ways to make entries: tapping with the stylus, tapping with your finger, or via the hardware keys of your device. 3.2.1 Icons Icons The following buttons appear at the right of every MEDIONNavigator screen: Return Tap this icon to return to the previous screen. This icon is not available on the MAIN SCREEN.
MEDION-Navigator 4.4 Entry Significance GMT Greenwich Mean Time Time of London ignoring daylight saving time. Longitude / Latitude Current position: Indication of east longitude and north latitude. Satellites Number of received satellites. At least three satellites must be received for navigation purposes. HDOP Horizontal Dilution of Precision: Indicates the quality of position determination. Theoretically any value from 0 to 50 may occur.
MEDION-Navigator 4.4 2. Tap the Off button to switch the GPS receiver off. 3. When the GPS-symbol in the upper right corner becomes red, tap the Cancel button. Note: Switching the GPS receiver on works the same way. 3.2.2 Hardware keys Hardware keys On the upper right corner of your device, there are the following hardware keys which allow to accede quickly the most important functions: On / Off Turns the device on / off. Configuration Opens the SETTINGS screen. Back Opens the precedent screen.
MEDION-Navigator 4.4 3.3 Indicating destinations Basic principle of navigation The indication of destinations is the basis of navigation respectively of itinerary planning. In this chapter, you will learn about the possibilities to indicate and manage destinations in MEDION-Navigator. For details on destination management, please refer to “Navigation and Itinerary planning”, page 57.
MEDION-Navigator 4.4 3.3.1 Entering a destination manually Database of places The data of all places covered by the currently loaded map is stored in the database of places. You need not enter the complete names of cities and streets as MEDION-Navigator lists automatically all names that match with your entry. If you enter for example "SHE" into the Town entry field you will obtain a list of all towns beginning or having into their names "She" or "she".
MEDION-Navigator 4.4 Special characters When you tap a key, a line above the software keyboard appears which lists all characters that may be entered by this key. The active character is highlighted. If, e.g., you want to type "ö", tap the "MNO" key repeatedly until "Ö" is highlighted in the line above the software keyboard. Indicating a destination… 1. On the main screen tap One destination. The DESTINATION screen opens. 2. Tap the Country entry field and select the destination country. 3.
MEDION-Navigator 4.4 7. Tap the Intersection entry field and select a crossroad if you want to define an intersection as destination point (e.g. because the house number is not available). 8. Tap the Save button if you want to navigate more often to the entered destination. You may then quickly select it from the Saved destinations list. 3.3.2 Selecting a Point of Interest Points of Interest Points of Interest are stored in the database of places and may be displayed on the map.
MEDION-Navigator 4.4 Points of Interest nearby Note: You may only display Points of Interest nearby when the GPS receiver is turned on and when the GPS signal strength is sufficient. Selecting a Point of Interest nearby... 1. On the POINT OF INTEREST screen, tap the Nearby button. The POINT OF INTEREST NEARBY screen opens: 2. Enter the radius around your current position within which you want to search for Points of Interest into the Radius entry field. 3.
MEDION-Navigator 4.4 5. Select the correct destination from the Point of Interest list field. All Points of Interest matching your entries are listed, including their linear distance from your current position: 6. Tap the Save button if you want to navigate more often to the entered destination. You may then quickly select it from the Saved destinations list. Points of Interest of superregional significance Selecting a Point of Interest of superregional significance... 1.
MEDION-Navigator 4.4 Points of Interest in another town Selecting a Point of Interest in another town... 1. On the POINT OF INTEREST screen, tap the In another town button. The POINT OF INTEREST IN ANOTHER TOWN screen opens: 2. Enter the name of the town in which you want to search for Points of Interest into the Town field. 3. Select the main category of Points of Interest to search for from the left one of the two Category list fields, e.g. “Culture”.
MEDION-Navigator 4.4 3.3.3 Indicating destinations on the map You may indicate a destination directly on the map. In addition to cities and streets, you may also select Points of Interest quickly. Indicating a destination on the map... 1. On the main screen tap One destination. The DESTINATION screen opens. 2. Tap the Select on map button. The MAP screen opens: 3. Tap on the place you want to determine as destination and hold.
MEDION-Navigator 4.4 Database information on the respective place will be loaded and displayed: 4. Tap the Task field. The TASK screen opens where you may indicate how to proceed: 5. Select Start navigation from the list to navigate to the respective place. Select the Save destination button if you want to navigate more often to the entered destination. You may then quickly select it from the Saved destinations list. The TASK screen closes and the task is indicated on a new screen. 6.
MEDION-Navigator 4.4 3.3.4 Saved destinations Saved destinations All destinations you have saved by tapping the Save button are listed on the SAVED DESTINATIONS screen. On this screen you may: select destinations for navigation purposes, rename destinations, and delete destinations from the list. 1. On the DESTINATION screen tap Saved destinations. The SAVED DESTINATIONS screen opens. Take over 2. Tap the entry of the respective destination.
MEDION-Navigator 4.4 Renaming a destination 1. On the DESTINATION screen tap Saved destinations. 2. Tap the entry of the destination to be renamed. 3. Tap the Rename icon. The NAME OF DESTINATION dialog box opens. 4. Enter the new name. 5. Tap OK. The destination is now renamed. Deleting a destination 1. On the DESTINATION screen tap Saved destinations. 2. Tap the entry of the destination to be deleted. 3. Tap the Delete icon. The destination is now deleted.
MEDION-Navigator 4.4 3.3.5 Recent destinations Recent destinations All destinations you have navigated to recently are listed on the RECENT DESTINATIONS screen. On this screen you may: select destinations for navigation purposes, add destinations to the SAVED DESTINATIONS list, and delete destinations from the list. Taking over 1. On the DESTINATION screen tap the Recent destinations button. The RECENT DESTINATIONS screen opens. 2. Tap the entry of the desired destination.
MEDION-Navigator 4.4 Saving a destination 1. On the DESTINATION screen tap the Recent destinations button. 2. Tap the entry of the destination you want to save. 3. Tap the Save icon. The NAME OF DESTINATION dialog box opens. 4. Enter a name for the destination. 5. Tap OK. The destination is now saved and will appear on the SAVED DESTINATIONS list. Deleting a destination 1. On the DESTINATION screen tap the Recent destinations button. 2. Tap the entry of the destination to be deleted. 3.
MEDION-Navigator 4.4 3.3.6 Save and use your home address Survey You may store your home address in MEDION-Navigator in order to quickly start navigation home at any place. Saving your home address… 1. On the Main screen, tap the Settings button . The SETTINGS screen opens. 2. Via the "Left" and "Right" icons, select Home address. 3. Tap the Enter your home address button. The DESTINATION screen opens.
MEDION-Navigator 4.4 4. Tap the Address button and enter your address as described in “Entering a destination manually”, page 33. 5. Tap the Set as home address button. The address is taken over to the HOME ADDRESS screen. 6. Tap the Save button. Using your home address for navigation... 1. On the main screen, tap . The fastest route is now being calculated and navigation starts. The Fast route option is always being applied when you start navigation to your home via the Home button.
MEDION-Navigator 4.4 3.4 Working with the map Survey There are various pieces of information available on the MAP screen. Learn in this chapter about the possibilities for working with the map, which depend on whether you are in navigation mode, or not. Displaying the map On the main screen, tap the Show map button to open the MAP screen. Provided maps There are additional maps included in the delivery on the MEDION-Navigator-CDs.
MEDION-Navigator 4.4 3.4.1 Operating the map Displaying the map You may display the map while planning an itinerary, in order to show destinations on the map, or in order to select destinations on the map. You may display the map via the Show map button on the main screen . On the DESTINATION screen you may tap the SELECT ON MAP button to display the map. The map is being displayed automatically when you are navigating. Tapping the map The icons appear when you tap the map.
MEDION-Navigator 4.4 Icons The following icons are displayed on the map: Zoom / Scroll Tap the Zoom/Scroll icon or to switch between Zoom and Scroll mode. Zoom In Zoom mode (the icon appears white) you may scale the map up or down. Zoom in by drawing a rectangle on the map, beginning with the upper left corner. Zoom out by beginning with the lower right corner. Scrolling In Scroll mode (the icon appears red) you may scroll the map. Tap on the screen and drag to the desired direction.
MEDION-Navigator 4.4 Zoom bar Tap one of the zoom bar sections to modify the scale of the map. Zoom out Tap Zoom out to scale the map up. Auto mode (GPS reception necessary) Tap the Auto icon to display the standard representation of the map after you have modified the view. The settings of north orientation and autozoom mode will be applied. Your current position will be centred. The icons will not be displayed. For details please refer to "Auto mode", page 72.
MEDION-Navigator 4.4 Show route list This feature is only available in navigation mode or when a calculated itinerary is loaded. Tap Show route list to display a list of all important waypoints of the route. For details, please refer to “Displaying the route list”, page 65. Change preferences Tap Change preferences to display the SETTINGS screen. For details, please refer to “Configuration of MEDION-Navigator”, page 70. Quit navigation This function is only available in navigation mode.
MEDION-Navigator 4.4 3.4.
MEDION-Navigator 4.4 Information on the itinerary At the right of the map, the following information on the itinerary is being displayed: Field Information This symbol means "stage". All information displayed below refers to the next stage point. ETA (Estimated time of arrival). Remaining time to arrival (estimated). Remaining distance to arrival (estimated). Tap this icon to repeat the last spoken instruction. All available information will be displayed.
MEDION-Navigator 4.4 3.4.3 Displaying additional information on the map In MEDION-Navigator you may determine which information is to be displayed on the map. Modifying any configuration begins on the SETTINGS screen. Configuring the display of additional information… 1. On the main screen, tap Settings or tap the icon on the map and select Change preferences. The SETTINGS screen opens. 2. Select Map information using the arrow buttons: Info bar 3.
MEDION-Navigator 4.4 7. Tap the command buttons to display (On) or not (Off) the respective information on the map. The desired information on the entire itinerary (upper section) and on the current stage (lower section) will be displayed at the right hand side of the map. Section Information This symbol means "itinerary". All information displayed below refers to the complete route. This symbol means "stage". All information displayed below refers to the next stage point.
MEDION-Navigator 4.4 4 Navigation and Itinerary planning Topics covered in this chapter: 4.1 General notes on navigation page 58 4.2 Navigating to a destination page 59 4.3 Navigating to several destinations (Itinerary planning) page 61 Working on itineraries, storage and management 4.
MEDION-Navigator 4.4 4.1 General notes on navigation Use of MEDION-Navigator is executed at your own risk. Caution: To protect yourself and others from accidents, do not program the navigation system while driving.
MEDION-Navigator 4.4 4.2 Navigating to a destination Navigating to a destination… 1. Enter your destination as described in “Indicating destinations”, page 32. 2. Tap the Start navigation button. The ROUTE OPTIONS screen opens: 3. Tap the TYPE OF ROUTING field and select one of the following options: Option Signification Fast route The quickest route will be calculated. Short route The shortest route will be calculated. Pedestrian route A route for pedestrians will be calculated.
MEDION-Navigator 4.4 4. Tap the Motorways, Ferries, and Toll roads fields successively and select one of the following options: Option Signification Permitted The respective kind of street will be regarded for route calculation. Avoid The respective kind of street will be avoided if reasonable. Forbidden The respective kind of street will be disregarded for route calculation. Note: The Route options settings will be saved.
MEDION-Navigator 4.4 4.3 Navigating to several destinations (Itinerary planning) Itinerary planning You may plan itineraries without receiving GPS signals, e.g. comfortably at home. Planned itineraries may be stored. Thus you may plan as many itineraries as you want, e.g. for holidays. Navigating to several destinations… 1. On the main screen, tap Several destinations. The ITINERARY screen opens: 2. Tap the Add destination icon to indicate the first stage point. The DESTINATION screen opens. 3.
MEDION-Navigator 4.4 6. Tap the entry of the stage point you want to navigate to first. Note: You have to select the stage point you want to navigate to first. You may then continue navigation when it was interrupted. You may as well navigate to only some of the stage points of a stored itinerary. 7. Tap Start navigation. The route is now being calculated. The map is being displayed in navigation mode.
MEDION-Navigator 4.4 4.3.1 Working on itineraries, storage and management Survey You may plan as much itineraries as you want, e.g. for holidays. You may save them and use them later for navigation purposes. At any moment, you may add stage points, modify the order of the stages, or display the itinerary on the map. The following commands are available: One place up Tap the One place up icon to navigate to the respective stage point earlier (example: stage 3 becomes stage 2).
MEDION-Navigator 4.4 Tap the Show on map icon to display the entire itinerary on the map. The route will be highlighted in blue: 4.3.2 Simulating the route Simulation You may execute a simulated navigation along the itinerary when the route has been calculated. Note: The reception of GPS-signals is not necessary for the simulation. Simulating the route… 1. Tap the Show on map icon. The itinerary is displayed on the map. 2. Tap the Additional functions icon. 3. Tap Start simulation.
MEDION-Navigator 4.4 4.4 Functions which are useful for navigation Survey In MEDION-Navigator the following functions are available in navigation mode: Displaying the route list, see below. Adding a stage point during navigation, see page 65. Blocking route sections, see page 66. 4.4.1 Displaying the route list Route sections During navigation (or just after the calculation of the route) you may display the route list, which informs about the distance and duration from one way point to the next.
MEDION-Navigator 4.4 4.4.2 Adding a stage point during navigation Adding a stage point during navigation… At any moment during navigation you may add a new stage point to your itinerary. The route will be recalculated in order to make the new stage point the next destination to navigate to. The other remaining stage points will be navigated to after the new one. Adding a stage point… Precondition: The map is being displayed in navigation mode. 1. Tap the Additional functions icon. 2.
MEDION-Navigator 4.4 4.4.3 Blocking a route section Blocking a route section manually You may block a route section manually in order to evade it. Manual blocking forces a recalculation of the route. Presume that you are driving on a motorway and a radio message announces a traffic jam of 4 miles near your current position. With the “Block route sections” function you may instruct the navigation system to evade the announced traffic jam.
MEDION-Navigator 4.4 5 Appendix Topics covered in this chapter: 5.
MEDION-Navigator 4.4 5.1 Configuration of MEDION-Navigator Configuration In MEDION-Navigator, you may modify the following settings: Map information, see below. Route information, see page 71. Volume, see page 71. Representation, see page 72, see page 73. Touch screen calibration, see page 72 Auto mode, see page 72. Speed profile, see page 73. Itinerary, see page 73. Time zone, see page 73. Itinerary, see page 73. Format, see page 73. Home address, see page 74.
MEDION-Navigator 4.4 5.1.2 Route information Route information On the ROUTE INFORMATION screen, you may effect the following modifications: Element Signification Dist. to final dest. Remaining distance to the final destination (estimated) Remaining time to the final destination (estimated). ETA (Estimated time of arrival) at the final destination. Tap the respective command buttons to display (On) or not (Off) the respective information on the map.
MEDION-Navigator 4.4 5.1.4 Representation Representation On the REPRESENTATION screen, you may effect the following modifications: Element Signification Skin Skins are made to personalize the user interface of MEDION-Navigator. Tap the Skin field. Select one of the available skins and tap OK. Brightness battery Tap this entry field and select a brightness degree (1 to 8) when the device is powered by its internal battery.
MEDION-Navigator 4.4 5.1.7 Speed profile Speed profile On the SPEED PROFILE screen, indicate your speed profile. This entry will have an effect on the calculation of the remaining time and of the estimated time of arrival (ETA). Tap the Speed profile button. Select one of the available profiles and tap OK. 5.1.
MEDION-Navigator 4.4 5.1.11 Home address Home address On the HOME ADDRESS screen, you may save your home address to quickly start navigation homewards from anywhere. 1. Tap Enter your home address. The DESTINATION screen opens. 2. Tap the Address button and enter your home address as described in “Entering a destination manually”, page 33. 3. Tap the Set as home address button. The address is indicated on the HOME ADDRESS screen. 5.1.
MEDION-Navigator 4.4 6 Glossary COM-port A COM port is a connector to a communications interface, usually the serial port. The ports are numbered by a number behind “COM”. A communications interface is designed to connect hardware like a mouse or a GPS receiver. GMT GMT (Greenwich Mean Time) is the mean solar time at the Royal Greenwich Observatory in Greenwich near London, England, which by convention is at 0 degrees geographic longitude.
MEDION-Navigator 4.4 7 Index A Additional functions ......................... 50 Assistance for navigation.................. 52 Autozoom ...................................... 72 B Bike route ...................................... 59 Blocking......................................... 67 K C Current position .............................. 52 33 44 59 42 44 E ETA (Estimated Time of Arrival)......... 71 G GMT .............................................. GPS ...........................................
MEDION-Navigator 4.4 O Orientation ..................................... 72 P POI ............................................... Point of Interest ......................... 35, In another town ........................... Nearby........................................ Of superregional significance.......... Points of Interest ............................ Proceed automatically ...................... 35 70 38 36 37 54 73 R Recent Destinations ......................... Remaining distance ..................
