Instruction manual

After Sales Support TEL: [phone] WEB Support: www.medion.com.au
61
Safety Handling
Components
Help Appendix
Starts Media Center.
Previous title/images/chapter
Next title/images/chapter
Rewind
Starts playback
Fast forward
Start recording
Ends the playback/recording
Pauses the playback at the selected point
Direct selection of the TV channels by means of
numbers. Number entry in the case of some
functions (video text, etc.).
Changing the Transmission/Reception Channels
If several computers with remote controls are set up in close proximity of each other
(approx. 10 metres), this can lead to disturbance. This can be remedied by choosing
different channels. Only reset the remote control in case of disturbances. Proceed as
follows:
1. Start the Control Panel.
2. Choose the menu item Wireless Remote Settings.
3. Check the option “Use Wireless Remote Settings with the remote set to this
channel”.
4. Select the new channel (a number between 1 and 16) and confirm your setting
with the Apply button.
5. Press and hold the Clear button on the remote.
6. Now enter the channel already set in the software by means of the numeric key pad
on your remote, without releasing the Clear button.
7. Press the OK button. Do not release the Clear button until then.
8. Press any button on your remote to see the current code.
9. Confirm your settings by using the OK button on the Wireless Remote Settings
window.