Instruction manual

After Sales Support TEL: [phone] WEB Support: www.medion.com.au
5
 After transportation, wait until the equipment is at room
temperature before turning it on. If there is a large difference in
temperature or humidity, damp can build up through condensation
and cause an electrical short circuit.
 Keep your hard drive and all connected equipment away from
dampness and avoid dust, heat and direct sunlight in order to
prevent operational problems.
 In order to avoid damage from a fall, place the hard drive on a
stable and level surface which does not vibrate.
 Position the cable so that no one can step on it or stumble over it.
 Do not place any objects or furniture on the cord to avoid
damage to it.
 The slits and openings in the hard drive are for air circulation. Do
not cover these openings, as this could lead to overheating.
 The voltages and interfaces used in the equipment are in line with
the low voltage protection guidelines set out in AS/NZS 60950.
Connections to other equipment may only be made using similar
interfaces with low voltage protection in accordance with AS/NZS
60950.
 Please contact the MEDION Help Desk if you have any technical
problems with your hard drive. If repairs are needed, please
exclusively use our authorised service partners.
 In the first hours of operation, new devices may emit a typical,
unavoidable but completely harmless smell, which will decrease in
the course of time.
We recommend that you ventilate the room regularly, to
counteract the formation of the smell.