Instruction manual

After Sales Support TEL: [phone] WEB Support: www.medion.com.au
10
1. Start your computer and wait until Windows® has been fully loaded.
2. Connect the USB-B connector of the supplied Y-cable to the USB
port of your external hard drive.
3. Connect the other end of the Y-cable which has two USB Type-A
connectors with the following labels:
The ‘MAIN’ connector must be connected to your PC / Notebook at
all times when in use; the ‘AUX’ is an additional power source, only
when your PC / Notebook does not supply sufficient power
strength with one USB port.
4. The operating indicator (blue LED) will light up as soon as the hard
drive is connected to a source of electricity.
5. With Windows® Vista/ XP/Windows® 7 the hard drive will be
automatically recognised and connected.
Information
You will be able to use the hard drive directly through the
data haven, without a cable connection, if you own a MEDION
PC equipped with the MEDION Extension Bay 3. Extension
bays of the older generation are not compatible. A direct
connection, without a USB cable, will not be possible for this
reason.