Instruction manual

15
Phone: [phone]
Internet: www.medion.com.au
After sales support
Insert/change remote control battery
The battery is already inserted in the remote control
upon delivery. To activate the remote control, remove the
insulation strip containing the notice “
PLEASE REMOVE
BEFORE USE” from the underside of the remote control.
Changing the battery
The remote control requires one 3 V button battery,
type CR2025.
WARNING!
There is a risk of explosion if batteries are
replaced incorrectly.
Replace batteries only with the same or
equivalent type.
• Press the latch (1) and pull out the
battery compartment (2).
• Remove the old battery and take it
to a used battery collection point for
proper disposal.
• Insert a fresh CR 2025 battery into
the battery compartment with the
positive pole facing up. Ensure the
+/- terminals are correct.
• Slide the compartment back into place.