Instruction manual

40 of 72
Telephone: [phone]
Internet: www.medion.com.au
After Sales Support
The Bluetooth wireless technology data transfer speed can vary depending on
the device or environmental factors. Data can be transferred through walls, jacket
pockets and briefcases using a Bluetooth device. The transfer between Bluetooth
devices occurs at the high frequency of 2.4 Gigahertz (GHz). For Bluetooth high
speed data transfer, Wi Fi must be enabled and the partner station must also
support the high speed mode.
CAUTION!
Do not operate the Bluetooth function in locations (e.g.:
hospitals, air planes, etc.) where there is sensitive equipment.
Do not switch the device unless you are sure it will cause no
interference.
12.3. Flight Mode
In flight mode, all wireless connections (e.g. Wi Fi, Bluetooth) are disabled. Flight
mode is disabled by default to ensure that all wireless connections are available.
 Move the mouse pointer into the top right or bottom corner of the display and
click Settings.
 Next, click Change PC settings.
 Click Wireless.
Now enable or disable Flight mode here. Alternatively, use the Fn +
keyboard shortcut to open flight mode.
Once flight mode is enabled, a small aeroplane is displayed in the traditional
desktop task bar. You can also enable/disable flight mode by clicking this icon.
99360 P2212T Aldi AUS RC1 Content.indd 4099360 P2212T Aldi AUS RC1 Content.indd 40 27.12.2013 07:41:4927.12.2013 07:41:49