Instruction manual

41
Telephone: [phone]
Internet: www.medion.com.au
After Sales Support
Manually setting up DHCP on a Windows PC
In AP operation, the management IP address of
the repeater is set to 192.168.66.1. Please ensure
that the IP address of your PC is in the range
192.168.66.2~192.168.66.252.
To log in via the web interface, the IP address of your PC must
be manually set to a value in this range. The procedure for
this is described in the next section.
Setting the IP address in Windows XP
 Click on the START button on the task bar and then
on Control Panel.
 Double-click on Network Connections and then
click on Display connection status.
 Select Local Internet settings. The window
Local area connection status appears. Click on
properties.
 Select the entry Internet Protocol (TCP/IP) –
General and then enter the IP address as described
below:
• IP address: 192.168.66.x (where x can be any number
between 2 and 200. If more than one computer is
using this access point, each computer must use its
own number)
• Subnet mask: 255.255.255.0
 To finish, click on OK.
86738 EN ALDI AUS Content RC2.indd 4186738 EN ALDI AUS Content RC2.indd 41 29.08.2012 09:09:2829.08.2012 09:09:28