Instruction manual

23 of 40
Telephone: [phone]
Internet: www.medion.com.au
After Sales Support
7. Recording videos
 Slide the function selection switch
to the desired position
.
 Hold down the POWER button for
2 seconds. The camera will vibrate
briefly 3 times to signal that the
device is now switched on.
The operating LED will light up blue when the
device is switched on.
 Press the RECORD button. The camera will
vibrate briefly 3 times to signal that the camera
is recording. The recording LED will light up red
during recording.
 Press the RECORD button again. The camera will
vibrate briefly once to signal that the recording has
ended and it has been saved.
NOTE!
The recording LED only lights up if a
memory card has been inserted into
the device.
If there is no memory card inserted in
the device or the card has been
incorrectly inserted, the charging LED
on the rear of the device will blink.
86692 50044461 EN ALDI AUS Content final.indd 2386692 50044461 EN ALDI AUS Content final.indd 23 17.09.2013 07:55:3117.09.2013 07:55:31