Specifications

S
S
E
E
R
R
V
V
I
I
C
C
E
E
13
S
S
E
E
R
R
V
V
I
I
C
C
E
E
TROUBLESHOOTING
If your LCD monitor should have problems please check if it is properly installed and plugged ac-
cording to the information given in the “Start-Up” section beginning on page 6). If the problems
cannot be solved, read the following chapter for possible solution.
FINDING THE PROBLEM
Many times, problems have simple causes. We would like to give you some tips to solve some com-
mon problems. Should these tips not help, please call us!
CHECK CONNECTIONS AND CABLES
Start by carefully checking all cable connections visually. If the indicator lamps do not function, ensure
that the LCD monitor and computer are properly connected to the line power.
TROUBLESHOOTING
No display on screen:
Check:
 Network supply: The network cable must rest securely in the socket and the network
switch must be switched on.
 Signal source: Please check that the source of the signal (computer, or other source) is
switched on and that the connecting cables are resting securely in the sockets.
 Image refresh frequency.
The current image refresh frequency must be suitable for the LCD monitor.
 Power saving mode. Press any desired key and move the mouse to deactivate the mode.
 Signal cable pins. If pins are bent, please contact your service dealer.
 Set the appropriate values for your LCD monitor (see "Preparations on your computer",
page 6).
Picture runs or not stable:
 Signal cable pins. If pins are bent, please contact your service dealer.
 Signal cable pins: The plugs of the signal cable must rest securely in the sockets.
 Video card. Check whether the settings are correct.
 Image refresh frequencies. Select permissible values for your graphic settings.
 Monitor output signal: The monitor output signal of the computers must match the tech-
nical data of the monitor.
 Remove any interfering equipment (portable telephones, loudspeakers, etc.) from the
vicinity of your LCD monitor.
 Avoid using monitor extension cables.
Colors not displayed cleanly:
 Check the signal cable pins. If pins are bent, please contact your service dealer.
 Readjust the corresponding settings.
 Avoid using monitor extension cables.
Characters displayed dark, picture too small, too large or not centered, etc.:
 Readjust the corresponding settings. (Setting LCD monitor, page 11)
The display is too light or too dark:
 Check that the video output level of the computer matches the technical data of the monitor.
 Select Auto Setup, to optimize the settings for brightness and contrast. The display should
show a text page (e.g. Explorer, Word, etc.), to optimize it.