Owner`s manual
English
8
Connecting the Monitor
Before using your LCD monitor, please read the "Safety and Precautions" section (page 2).
We recommend that you also read all the other sections as these contain detailed explanations and tips on how
to use your LCD monitor.
(Ill.: Rearside connectors)
• Ensure that the LCD monitor is not plugged in and neither the LCD monitor nor the computer is switched
on before continuing.
• Prepare your computer for the LCD monitor if necessary with the correct settings for your LCD.
n Connecting the Signal Cable
• Plug the signal data cable into the matching VGA sockets on the computer and the monitor. If your PC
also has a DVI port, you can connect your monitor by means of the DVI-D cable instead of the VGA port.
Note
Even if you computer offers multiple connections, connect only one cable to avoid problems with
the signal detection.
o Connecting the Audio Cable
• Plug the audio cable into the matching sockets on the computer and the LCD monitor.
p Connecting the Power Supply
• Plug the power supply cable into the LCD monitor socket. Connect the other end of the cable to a
grounded AC outlet. The outlet should be near the monitor and easy to access.
• Located on the back side of your LCD Monitor is an O/I switch. If the switch is set to O, no power is con-
sumed. Switch to I and then turn on the monitor using the On/Off button, located on the front side. Fi-
nally, turn on your computer.
Power
supply
VGA
connector
Audio
connector
Power
switch
DVI-D
connector