Operating instructions

Start-Up 7
Connecting the Display
To start using the TFT display straight away, please read the "Safety and Precautions" section (page 2).
We recommend that you also read all the other sections as these contain detailed explanations and tips on how to use your TFT
display.
(Ill.: Rearside connectors)
• Ensure that the TFT display is not yet connected to the line power (power cord not yet plugged in) and neither the TFT
display nor the computer is switched on.
• Prepare your computer for the TFT display if necessary with the correct settings for your TFT.
n Connecting Signal Cable
• Plug the data cable into the matching VGA connections on the computer and the display. If your PC also has a DVI
output, you can connect your display by means of the DVI-D connector.
Note
Even if you computer offers multiple connections, connect only one cable to avoid problems with the signal
detection.
o Connecting Audio Cable
• Plug the audio cable into the matching sockets on the computer and the TFT display.
p Connecting the Power Supply
• Plug the power supply cable into the power supply socket of the TFT display and plug the electric plug into a socket
close to the TFT display (same circuit).
• Switch your display on using the on/off switch. Then switch on your computer.
Power
supply
VGA
connector
Audio
connector
DVI-D
connector
Power
switch