Operating instructions

Start-Up 5
Start-Up
Note
Before start-up always read the Chapter "Safety and Precautions" on page 1ff.
Mounting the Display Stand
Mount the display stand as shown in the diagram. Perform this step before connecting the display.
(Ill.: Mounting the display stand)
Preparations on Your Computer
If you have operated your computer previously with a CRT display, it will be necessary for you to make a few preparations. This
is required when your previous display was operated with settings which are not supported by your new TFT display.
Supported Display Settings
This TFT display supports the following modes:
Resolution Horizontal Frequency Vertical Frequency
720 x 400 31.47 KHz 70 Hz
640 x 480 31.47 KHz 60 Hz
640 x 480 37.86 KHz 72.8 Hz
640 x 480 37.5 KHz 75 Hz
800 x 600 37.88 KHz 60.3 Hz
800 x 600 48.08 KHz 72.2 Hz
800 x 600 46.87 KHz 75 Hz
1024 x 768 48.36 KHz 60 Hz
1024 x 768 56.48 KHz 70.1 Hz
1024 x 768 60.02 KHz 75 Hz
1280 x 1024 80.00 KHz 75 Hz
1440 x 900 55.47 KHz 59.90 Hz
1680 x 1050* 64.67 KHz 60 Hz
*recommended physical resolution