Operating instructions
E
E
N
N
G
G
L
L
I
I
S
S
H
H
8
Connecting the Monitor
To start using the TFT monitor straight away, please read the "Safety and Precautions" section
(page 2).
We recommend that you also read all the other sections as these contain detailed explanations and
tips on how to use your TFT display.
(Ill.: Rearside connectors)
• Ensure that the TFT monitor is not yet connected to the line power (power cord not yet
plugged in) and neither the TFT monitor nor the computer is switched on.
• Prepare your computer for the TFT monitor if necessary with the correct settings for your TFT.
n Connecting Signal Cable
• Plug the data cable into the matching VGA connections on the computer and the monitor.
o Connecting Audio Cable
• Plug the audio cable into the matching sockets on the computer and the TFT monitor.
p Connecting the Power Supply
• Plug the power supply cable into the power supply socket of the TFT screen and plug the elec-
tric plug into a socket close to the TFT screen (same circuit).
• Your TFT monitor has an ON/OFF switch, by means of which you can switch the monitor on or
off, on the back. If the switch is set to 0, then no power is consumed. Set the switch to I and
next switch your monitor on using the on/off switch. Then switch on your computer.
Power
supply
VGA
connector
Audio
connector
Power
switch