Operating instructions

Connecting the Monitor

To start using the TFT monitor straight away, please read the "Safety and Precautions" section

(page 1).

We recommend that you also read all the other sections as these contain detailed explanations and

tips on how to use your TFT display.

(Ill.: Rearside connectors)

• Ensure that the TFT monitor is not yet connected to the line power (power cord not yet

plugged in) and neither the TFT monitor nor the computer is switched on.

• Prepare your computer for the TFT monitor if necessary with the correct settings for your TFT.

n Connecting Signal Cable

• Plug the data cable into the matching VGA connections on the computer and the monitor. You

will be able to connect your monitor by means of the DVI connector if your PC also has a DVI

output.

o Connecting Audio Cable (optional)

• Plug the audio cable into the matching sockets on the computer.

p Connecting the Power Supply

• Plug the power supply cable into the power supply socket of the TFT screen and plug the elec-

tric plug into a socket close to the TFT screen (same circuit).

• Your TFT monitor has an ON/OFF switch, by means of which you can switch the monitor on or

off, on the back. If the switch is set to 0, then no power is consumed. Set the switch to I and

next switch your monitor on using the on/off switch.

• Then switch on your computer.

power supply

VGA

connection

DVI

connection

audio

connection

On/Off switch