Software Manual
Table Of Contents
- Chapter 1. Introduction
- Chapter 2. Manual installation and start-up
- Chapter 3. Installation and start-up using the GoPal® Assistant
- Chapter 4. Basics of operation
- Chapter 5. Adjusting the Settings
- Chapter 6. Operating the GoPal® navigation software

Adjusting the settings
31
Tip
Please be aware that the use of so-called speed-cam warnings may not be permitted.
Before you use the speed-cam warning, you must find out about its current legal status.
If the use of speed-cam warnings is not permitted, you must not use this function.
Note
Please be aware that depending on the pack contents, this function may not be available
on every version of the navigation software and therefore may not be displayed.
Adjusting the device settings
The settings listed here are identical to the basic settings for operation which have already been
described in the Basic settings for operation section.
Adjusting the Quick menu settings
The Quick menu is available by pressing the button located in the lower right corner of the map
view, giving you direct access to functions otherwise only available using the conventional menus.
This means you can, for example, assign the option City to one of the Quick menu buttons: When
you tap the button, you will then be taken directly to the area for entering the city on the Enter new
destination screen. You could also assign, for example, the additional MP3 Player application to
another Quick menu button in order to call this application up directly. Doing this allows you to
configure up to six frequently used functions and call them up quickly using the Quick menu
buttons.