30 Inch Flat Panel LCD - TV © 2004 All rights reserved. Trademarks: MS-DOS® and Windows® are registered trademarks of Microsoft®. Pentium® is a registered trademark of Intel®. Other trademarks are the property of their respective owners. We make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
CONTENT 1. SAFETY AND PRECAUTIONS .............................................. 1 Operating Safety .............................................................. 1 Repair ............................................................................. 2 Notes for Service Engineers ............................................. 2 Point of use ................................................................... 3 Environmental conditions................................................. 3 Connecting ..............
Deutsch 7. GENERAL CONTROLS & ADJUSTMENT ............................... 22 Turning the LCD display On and Off ................................... 22 English Switch between TV / PC / AV ............................................ 22 Switching TV CHANNELS .................................................. 23 Volume Control............................................................... 23 Italiano Using Volume Control.................................................... 23 Using Mute ....................
9. TELETEXT ..................................................................... 35 To operate TELETEXT ...................................................... 35 Teletext Page Selection.................................................... 35 Useful features for Teletext .............................................. 36 10. PC MODE ADJUSTMENT ................................................ 39 11. OTHER FUNCTIONS ...................................................... 41 12. TROUBLESHOOTING...................
Deutsch English 1. SAFETY AND PRECAUTIONS Italiano Please read through this section carefully and follow the instructions to maximize the reliable operation and lifetime of your LCD display. Always keep these instructions handy and close by your LCD display. Keep the instructions and the packaging so that if you sell or give away your LCD display you can give them to the new owner.
Contact the Call Center immediately in any of the following situations. Do NOT plug in or turn on your display: ♦ if the power cable/power supply overheats or is damaged ♦ if liquid has gotten into the monitor ♦ if the LCD display is dropped or the housing damaged REPAIR • Leave all repairs of your LCD display to authorized and qualified personnel only. • Should a repair be necessary, please contact one of our authorized service partners only.
Deutsch POINT OF USE English • Keep your LCD display and all units connected to it away from moisture and avoid dust, heat and direct sunlight. Failure to observe these instructions can lead to malfunctions or damage to the LCD display. Italiano • Place and operate all units on a stable, level and vibration-free surface in order to avoid the LCD display from falling.
CONNECTING Observe the following instructions to connect your LCD display properly: POWER SUPPLY • Do not open the power supply housing. An open housing presents a lethal hazard from electrical shock. There are no parts inside to be cleaned or serviced. • Operate your LCD display only with grounded outlets with AC 100230V~/ 50 Hz. If you are not sure about the power supply at your location, check with your power company. • Use only power connection cable provided.
Deutsch STANDARDS/ELECTRO-MAGNETIC COMPATIBILITY English Your display fulfils the requirements for electro-magnetic compatibility and electrical safety specified in the following standards: EN 55013, EN 55020, EN 60065 EN 61000-3-2, EN 61000-3-3 Italiano • When connecting ensure that Guidelines for Electro-Magnetic Compatibility (EMC) are observed. • Provide a space of at least three feet from high-frequency and magnetic sources of interference (television sets, loudspeakers, mobile telephones, etc.
PRECAUTIONS Â Caution! There are no parts which can be serviced or cleaned inside of the monitor housing. You can increase the life of your LCD display by taking the following precautions: • Before cleaning always disconnect the power line and all connection cables. • Do not use any solvents, caustic or gaseous cleaning agents. • Clean the display with a soft, lint-free cloth. • Ensure that no water droplets remain on the screen. Water can cause permanent discoloration.
Deutsch FCC COMPLIANCE STATEMENT Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced technician for help. Italiano Français • Nederlands Reorient or relocate the receiving antenna. Dansk • English This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules.
8 ENGLISH
Deutsch 2. INTRODUCTION English Thank you for purchasing our LCD Multi-display. We thank you for your confidence in our products and are pleased to greet you as a new customer. We focused on great features, ease of use and reliability in manufacturing your LCD display. Italiano SERVICE Français Service and support will be available every time you use your new monitor. Contact us, we will be glad to help you. This manual contains a separate chapter on the subject of Troubleshooting on page 42.
INCLUDED EQUIPMENT Please make sure the following items are included with your LCD Display. Notify us within 14 days after purchase if it is not complete.
Deutsch English 3. CONNECTING EXTERNAL DEVICES S-video Video Audio (left) Italiano Audio (right) Earphones Dansk Nederlands Français Subwoofer Español Note: Türkçe Português Audio out L/R: The level of audio output cannot be changed using the volume, treble, and bass controls on your display. This connector should be used with an external audio amplifier that can be used to control the volume. 3.
TV SCART 1 SCART 2 DVI-D VGA Electrical connection Main switch Both SCART connections support the following functions: 12 Video S-video RGB SCART 1 Input Input Input SCART 2 Input/Output Input/Output - ENGLISH
Deutsch English 4. CONTROLS AND LOCATION These buttons control your display’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control. Italiano Turn down the volume. Navigation in OSD. Turn up the volume. Navigation in OSD. Change channels down. Navigation in OSD. Français Change channels up. Navigation in OSD. Display the main menu. One level back in the Menu. Nederlands Select input source (TV, SCART 1, SCART 2, Video, S-Video, VGA and DVI).
14 ENGLISH
Türkçe Português Español Dansk Nederlands Français Italiano English 5. REMOTE CONTROL Deutsch 5.
SUMMARY OF CONTROL BUTTONS Selecting the Signal Source Switch to the TV mode. Switches to video mode or S-video mode Switches to SCART 1. Switches between video, S-video, RGB and Auto if pressed several times. Switches to PC mode (VGA or DVI) Switches to SCART 2. Switches between video, S-video Auto if pressed several times. Menu Setting Display the main on-screen menu or enter the next menu. Press to select the item you want to adjust in the OSD menu.
Deutsch Changing Channels English Press P- or P+ to change programs in TV mode or Teletext page in TELETEXT mode. Français Italiano To select programs directly in TV mode. Displays the current signal source, program number and sound options. Nederlands Press to return to the previous program. Sound Control Dansk Press to turn up or turn down the volume. Español Press to switch the sound on or off. Türkçe Português Press to choose Stereo, Bilingual or Monaural broadcasts. 5.
Teletext Control TELETEXT Press to show the Teletext Service. Press again to return to TV viewing. INDEX Press to show the list of Teletext contents. HOLD Press to stop the automatic page change. SIZE Press to enlarge the top half or bottom half of the Teletext page. REVEAL Press to display concealed information, such as solutions of riddles or a quiz. CANCEL Press to switch to TV while waiting for the next page. SUBPAGE/TIME Press to access to the sub-page you required.
Deutsch PIP Control English Press to watch one of the video sources on Sub-display, whilst in OC mode. Press again to turn off the Sub-display. Italiano Selects the source of the PIP Window. Français To shift the PIP Window in connection with the following buttons: P+ shifts upwards P- shifts downwards Vol – shifts to the left Vol+ shifts to the right Türkçe Português Español Dansk Nederlands Sets the size of the PIP Window. 5.
Other Functions POWER key. To switch on and off. Reset the original factory setting, such as Contrast and Color. Changes the format. Adjusts the backlight in three levels. Press to select a preset time interval for automatic power off. Shows the digital clock in TV mode.
2. Insert two AAA type batteries into battery compartment on the rear of the remote control. 3. Please check, that the external 75 Ohm antenna cable, the power adapter and the corresponding power cord are connected correctly. 4. Switch on the LCD-TV by means of the main switch. 5. Press the POWER button to switch the set on. 6. The First Setup menu will appear when you turn on the multimedia display for the first time.
7. GENERAL CONTROLS & ADJUSTMENT TURNING THE LCD DISPLAY ON AND OFF Your LCD-TV offers you different possibilities for switching it on. Make sure that the main switch is switched on. Then proceed as follows. Press the POWER button on the remote. or You can also use the POWER button at below right on the LCD-TV. or Press the button of the respective signal source on your remote (TV, AV/SV, SCART 1, SCART 2 or PC). You will switch on the LCD-TV and select the signal source at the same time with this.
Deutsch SWITCHING TV CHANNELS 1. Make sure that the LCD-TV is in TV mode. Italiano English 2. You will switch up and down between the channels in your channel table with the P+/P- buttons. You can select the required channel directly with the assistance of the number block on the remote. Press the RTN button if you want to call up the channel viewed most recently. VOLUME CONTROL USING VOLUME CONTROL Français Press VOL-/ VOL+ button to turn up or turn down the sound volume.
VIEWING THE MENUS AND ON-SCREEN DISPLAYS 1. With the power on, press the MENU button. The main menu appears on the screen. PICTURE COLOR TEMP SOUND TV MONITOR RESET MODUE INPUT UV:SELECT YZ:ADJUST 2. Use the P+ / P- button to select one of the menu options, and then press the MENU button to access to the Sub-menu. 3. Carry the changes out with the VOL+/VOL- buttons. 4. Press the EXIT button to return to the previous screen or select END and confirm with MENU button to leave the Menu.
Deutsch CONTRAST AND BRIGHTNESS SETTINGS English You may need to perform separate adjustments for brightness and contrast for the different video modes. 1. Press the MENU button to display the main menu. 2. Press the P+ / P- button to move cursor to PICTURE. Italiano 3. To set the brightness: select the BRIGHTNESS menu point and press the VOL+/VOL- buttons to increase or lower the screen brightness.
MENU OVERVIEW Press the MENU key while the device is switched on. The following options appear on your screen. PICTURE BRIGHTNESS CONTRAST SATURATION SHARPNESS NOISE REDUCT EXIT UV:SELECT YZ:ADJUST You can adjust several screen settings in this menu, including BRIGHTNESS, CONTRAST, SHARPNESS and COLOR SATURATION. You can activate NOISE REDUCTION to suppress picture distortion.
Deutsch SOUND English EQUALIZER BALANCE LOUDNESS PSEUDO STEREO SUBWOOFER AUTO GAIN EXIT Italiano UV:SELECT YZ:ADJUST Nederlands Français You have the possibility of making changes to the EQUALIZER (pop, classical, voice, jazz, flat, user definition, etc.), to the AUDIO BALANCE (left and right) and to the LOUDNESS through the SOUND Menu. Apart from this, you can set the PSEUDO STEREO EFFECT for a full sound in this Menu.
MONITOR AUTO CLOCK PHASE H POSITION V POSITION AUTO COLOR UV:SELECT YZ:ADJUST You set the LCD-TV levels in the MONITOR Menu, when the device is in PC mode. RESET PRESET GENERAL RESET EXIT UV:SELECT YZ:ADJUST You can activate two different types of reset through the Reset Menu. The AUDIO and IMAGE settings will be reset with the PRESET function, while you will recreate the state at delivery with GES.RESET. A new channel search will be necessary then.
Deutsch INPUT English TV PC SCART1 SCART2 VIDEO SVIDEO EXIT Italiano UV:SELECT YZ:ADJUST Türkçe Português Español Dansk Nederlands Français Via the input menu you can select your signal source. 7.
30 ENGLISH
Deutsch English 8. TV MODE ADJUSTMENT ADJUSTING TV SETTINGS 1. Select "TV" mode as signal source using the TV key on the remote control. Italiano 2. Press the Menu key and select TV on the screen menu. Français PROGRAM TABLE MANUAL SCAN AUTO SCAN EXIT Nederlands UV:SELECT YZ:ADJUST ADJUSTING PROGRAM TABLES Dansk The program table indicates the channel numbers and names. You can change, edit or delete names or add channels in this list. 7.
CHANGE OR EDIT NAMES 1. Move to the program number you want to rename or edit name by pressing P+ / P- button. 2. Press the YELLOW button. 3. Press P+ / P- button repeatedly to select a letter, and then press VOL- / VOL+ button to select the position. (Each program name could be edited with 5 characters) 4. Press YELLOW button again to store. INSERT PROGRAM NAMES 1. Select the program that you want to insert using the buttons P+ / P- / VOL- / VOL+. 2. Press the GREEN button. 3.
Deutsch MANUAL SCAN PROGRAMS English You can limit the search interval for manual scanning. Please proceed as follows: 1. Select the menu item Manual Scan in the TV menu. Français Italiano 2. Confirm your selection with Yes. Nederlands RANGE: 45.25MHz 863.25MHz SCAN 3. Enter the starting point using the key pad. Dansk 4. Use the P button to go to the following number. This is the end point of the search area.
NICAM/IGR BROADCAST SELECTION Depending on the particular program being broadcast, you can press the SOUND button to listen to stereo, bilingual or monaural. 1. Press the SOUND button directly to display the three states on the top right of the screen. 2. Press the SOUND button repeatedly to select the following states. STEREO BROADCAST ● Each time you press SOUND, the mode changes between “Stereo” and “Mono”. ● When “Mono” is selected, the TV sound is output monaurally.
Deutsch English 9. TELETEXT Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information news, weather, television program, share prices, subtitles, and many other topics. Italiano TO OPERATE TELETEXT 1. Select a TV station on which Teletext is being transmitted. Français 2. Press the TELETEXT button once to appear the Teletext screen. Press the TELETEXT button again to switch off Teletext. The previous program reappears. TELETEXT PAGE SELECTION Nederlands 1.
USEFUL FEATURES FOR TELETEXT INDEX * Press this button to select the index page that displays the list of Teletext contents. HOLD The Teletext page you have selected may contain more information than what is on the screen; the rest of the information will be displayed after a period of time on a sub-page. * Press HOLD button to stop the automatic page change. -The HOLD symbol will be displayed at the top left-hand corner on the screen and the automatic page change will be stopped.
Deutsch SUB-PAGE / TIME English In Teletext mode, sub pages are subsections of long Teletext pages that can only be displayed on the screen one section at a time. * Select the required Teletext page. (e.g. 524) * Press SUB-PAGE button. “S0000” will be displayed. Italiano * Select the required sub page number by pressing four digit buttons (e.g. 0001). * The Teletext sub page number will be displayed on the lower right corner of the screen when the selected page is found.
38 ENGLISH
Deutsch English 10. PC MODE ADJUSTMENT Türkçe Português Español Dansk Nederlands Français Italiano This LCD-TV can double as PC monitor. There are two options for connection: VGA (analog) and DVI-D (digital). 10.
1. Connect a VGA or DVI-D data cable to your LCD-TV and the corresponding port on your PC. 2. You also may connect an audio cable (RCA L/R to 3.5mm plug, available at professional dealers) with the AUDIO 3 port and the audio input of your PC. 3. Please switch on your PC and LCD-TV now. 4. Press the PC button on your remote control. Pressing the button again toggles between DVI-D and VGA. Please take care, that the resolution of your PC matches the one of the LCD-TV.
Deutsch English 11. OTHER FUNCTIONS 1. “Aspect” button (Screen Aspect Ratio) ARC - Aspect Ratio Control Italiano * The Aspect button on top of the TV serves the same purpose as the ARC button on the remote control. * Normal: This sets the aspect ration to 4:3 for traditional TV programs. There will be black bars at either side of the screen. Français * Periscope: Expands 4:3 video sources to fit the 16:9 screen by magnifying the image at the edges of the screen.
12. TROUBLESHOOTING Many times, problems have simple causes. We would like to give you some tips to solve some common problems. Should these tips not help, please call us! There is no picture or sound. Make sure the AC adapter is properly inserted in the power outlet. Make sure the input mode is set to correctly. Make sure the main power switch of the main unit is on. There is no picture. There is no picture from AV. Make sure the Contrast/Brightness is properly adjusted.
Deutsch The picture is doubled or tripled. Make sure the aerial is facing the right direction. There may be reflected electric waves from mountains or buildings. English The picture is spotted. There may be interference from automobiles, trains, high voltage lines, neon light, etc. There may be interference between the antenna cable and power cable. Try moving them further apart. Italiano There are stripes on the screen or colors fade.
13.
Deutsch English 14.
Items Specification Display Screen size 30” TFT (Thin-Film Transistor) LCD panel Resolution 1280 x 768 Aspect ratio 15:9 Display area (HxV) 643 x 385 mm Pixel pitch 3x0,1675 (H) x 0,5025 (V) Display colours 16,7 Mio. colours Contrast ratio 600:1 Brightness 550 Cd/m3 View Angle (H, V) 170°/ 170° (typ.) Response time 16ms (typ.
Deutsch Dimension and Weight Dimension (W x H x D) 912,3 x 554 x 194 mm (with stand) Weight 18 kg (with stand) 16 kg (without stand) English 912,3 x 494 x 102 mm (without stand) Accessories Türkçe Português Español Dansk Nederlands Français Italiano User’s manual, remote control, batteries (AAAx2), power cord, cables 14.
WARRANTY We warrant to our customers that this product is free from defects in materials and workmanship as follows: for a determined period from the date of original purchase, defective parts or a defective product returned to a repair facility or an Authorized Service Facility ("ASF") for such product, as applicable, and proven to be defective upon inspection, will be exchanged for new or comparable rebuilt parts, or a refurbished product, as determined by the repair facility or the ASF.
Deutsch Türkçe Português Español Dansk Nederlands Français Italiano English INABILITY TO USE THE PRODUCT NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF OUR COMPANY. Some countries, states or provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
PIXEL ERRORS WITH LCD TVS Active matrix LCDs (TFT) with a resolution of 1024 x 768 pixel (XGA), which are in turn composed of three sub-pixels each (red, green, blue), contain about 2.4 million addressable transistors. Because of this very high number of transistors and their extremely complex production process occasionally defective or incorrectly addressed pixels or sub-pixels may occur.
Deutsch English INDEX INDEX ................................ 36 Insert Program Names .......... 32 Introduction ..........................9 C CANCEL ..............................36 Change or Edit Names...........32 Changing Channels ...............17 Child Lock ...........................25 Connecting ...................... 4, 11 Contrast and Brightness Settings ...........................25 Controls and location ............13 Copyright ..........................
Safety instructions................. 6 Connecting ........................ 4 Environmental conditions..... 3 Precautions ....................... 6 Repair .............................. 2 Service ........................... 9, 42 Service Engineers .................. 2 Setting the Sleep Timer.........23 SIZE...................................36 Sound Control......................17 Specifications.......................45 Standards ............................ 5 FCC Compliance Statement.. 7 SUB-PAGE/TIME .....
