Service manual

Outline of the M785
1-18 FIC M785 Service Manual
n System Time – To set the time, enter the current hour, minute, and second on
hr/min/sec, 24-hour format.
n System Date – This field lets you set the calendar month, day, and year. The
calendar clock remains in memory even after you turn off the system.
n Language – Language for each country. Default setting as US language.
n Boot Display Device – This field allows you to set the output boot display to
the LCD, CRT, or Both.
n Primary Master – This field displays various parameters for the hard disk drive.
If type [Auto] is selected, the system automatically sets these parameters. If type
[User] is selected, Cylinders, Heads and Sectors can be edited.
n Secondary Master – This field displays various parameters for the internal
CD-ROM or a DVD-ROM / Combo Drive.
n System Memory, Extended Memory, CPU Type, CPU Speed and
BIOS Version – These fields are for information only as the BIOS automatically
detects related values.
PhoenixBIOS Setup Utility
Main
Internal HDD [FUJITSU MHR2020AT] Item Specific Help
Type:
[Auto]
User = you enter
LBA Format Parameters of hard-disk
Total Sectors: 39070080 Drive installed at this
Maximum Capacity: 20004MB connection.
Auto = autotypes
Multi-Sector Transfers: [16 Sectors] Hard-disk drive
LBA Mode Control: [Enabled] Installed here.
32 Bit I/O: [Disabled] 1-39 = you select
Transfer Mode: [Fast PIO 4] Pre-determined type of
Ultra DMA Mode: [Mode 2] Hard-disk drive
Install here.
CD-ROM = a CD-ROM drive
Is installed here.
ATAPI Removable =
Removable disk drive is
installed here.
F1 Help
h
Select Item −/+ Change Values F9 Setup Defaults
Esc Exit
ßà
Select Menu Enter Select 4Sub-Menu F10 Save and Exit
Figure 1-13 Internal HDD/CD-ROM Sub-Menu
PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com