Instruction manual

After Sales Support TEL: [phone] WEB Support: www.medion.com.au
3
Safety Instructions
Please read this chapter carefully and observe all listed notes. This will
ensure reliable operation and long life expectancy of your product. Keep
these instructions with your product at all times. The proper set up, use and
care can help extend the life of your product. In the event that you transfer
ownership of this product, please provide these instructions to the new
owner.
Safety and Installation
 Do not let children play unattended with electrical devices.
 Hard disks are extremely fragile. Never drop or shake the hard drive -
this could irreversibly damage the data on the hard disk. Be
especially careful when transporting the hard disk as we provide
no guarantee for this type of damage.
 The hard drive can become warm after prolonged use.
 Never open the casing of your hard disk, if you do the hard disk will
no longer be covered by our guarantee.
 The hard disk is not designed for use in commercial
applications/situations.
 After transportation, wait until the equipment is at room
temperature before turning it on. If there is a large difference in
temperature or humidity, damp can build up through condensation
and cause an electrical short circuit.
 Keep your hard disk and all connected equipment away from
dampness and avoid dust, heat and direct sunlight in order to
prevent operational problems.
 In order to avoid damage from a fall, place the hard disk on a stable
and level surface which does not vibrate.
 For additional safety, we recommend using power connection
through a power surge protection unit in order to protect your
equipment from power surges and lightning strikes.
 The voltages and interfaces used in the equipment are in line with the
low voltage protection guidelines set out in EN60950. Connections to
other equipment may only be made using similar interfaces with low
voltage protection in accordance with EN 60950.