Specifications

S
S
T
T
I
I
L
L
L
L
M
M
O
O
D
D
E
E
35
SETTING FOCUS AREA
( mode only).
1. In the still mode menu, select "Focus Area" and then
press  on the four-way key.
2. Select "Central" or "Spot".
3. Press "OK" to confirm the setting.
SETTING FOCUS MODE
( mode only).
1. In the still mode menu, select "Focus Mode" and then
press  on the four-way key.
2. Select "Auto Focus" or "Manual Focus".
3. Press "OK" to confirm the setting.
4. When using manual focus, press
 on the four-way key
to adjust the focus.
SETTING LIGHT SENSITIVITY
ISO value affects the camera’s sensitivity to light. The de-
fault ISO setting is "Auto", but you can also adjust the set-
ting manually. Use a low ISO value in bright conditions, and
a high ISO value when light is insufficient.
1. In the still mode menu, select "ISO" and then press 
on the four-way key.
2. Select "Auto", "ISO 200", or "ISO 400".
3. Press "OK" to confirm the setting.
 Note: A high ISO value may lead to noise in the
picture.
 Note: ISO speed resets to default "Auto" after you
turn off the camera.