Specifications

TAKING A PICTURE USING AUTO FOCUS

Pressing the shutter release button halfway down sets the

focus and exposure. The camera will automatically focus on

the subject in the center of the frame.

1. Rotate the mode dial to still mode

2. Frame your subject so it is com-

pletely visible in the viewfinder or the

LCD screen. Press the shutter release

button halfway down and hold it to

set the focus and exposure.

3. Press the shutter release button all

the way down to take the picture.

Some circumstances may cause the auto focus to fail to cap-

ture the image sharply:

 When you shoot from behind a sheet of glass

 When you shoot subjects that have low contrast in color

(ex: sky, white walls and so on)

 When shooting two subjects that are far apart (the cam-

era might focus on the wrong subject)

 When there are horizontal lines in the frame

Note : Different colors of focus brackets stand for dif-

ferent focus condition.

Â Yellow: Auto Exposure and Auto Focus in progress

Â Green: Auto Exposure and Auto Focus successful

Â Red: Auto Exposure and Auto Focus failure