Operation Manual

ManualsBrandsMedion ManualsDesktopAKOYA P5207 F - Windows 10

Table Of Contents

1. About these operating instructions
- 1.1. Warning symbols and key words used in these operating instructions
- 1.2. Proper use
- 1.3. Declaration of conformity
- 1.4. Information on trademarks
2. Safety information
- 2.1. Dangers for children and people with reduced ability to operate machinery
- 2.2. Operating safety
- 2.3. Never carry out repairs yourself
- 2.4. Data backup
3. Package contents
4. Setting up the PC
- 4.1. Installation location
- 4.2. Environmental requirements
- 4.3. Ergonomics
5. Connecting
- 5.1. Connecting the cables
- 5.2. Opening and closing the front cover (optional)
- 5.3. Connecting the monitor (optional)
- 5.4. Connecting an HDMI device (optional)
- 5.5. Connecting devices with mini HDMI connection (optional)
- 5.6. Touchscreen (optional)
- 5.7. Connecting USB devices (optional)
- 5.8. Connecting PS/2 devices (optional)
- 5.9. Connecting the audio output / headphones / speaker boxes
- 5.10. Connect microphone (optional)
- 5.11. Connecting audio input / recording source
- 5.12. Connecting the network (LAN)
- 5.13. Connecting S-ATA devices (optional)
- 5.14. Illumination (optional)
- 5.15. Connecting power supply
6. Starting up for the first time
- 6.1. Starting up your PC
- 6.2. Overclocking button (optional)
7. Mouse
- 7.1. Left button
- 7.2. Right button
- 7.3. Scroll wheel
8. Keyboard
- 8.1. The Alt, Alt Gr and Ctrl keys
9. Hard drive
- 9.1. Important directories
- 9.2. Hot-swap mobile rack (optional)
- 9.3. Connecting an external hard drive (optional)
10. Optical drive (optional)
- 10.1. Loading a disc
- 10.2. Playing/reading discs
- 10.3. Blank CDs and DVDs
11. Card reader (optional)
- 11.1. Inserting a memory card
- 11.2. Removing memory card
12. Graphics system
13. Sound system
14. USB connection (optional)
15. Network operation
- 15.1. Wireless LAN (Wi-Fi)
16. Settings
- 16.1. Reset PC to factory settings
- 16.2. UEFI firmware setting
17. FAQ - Frequently Asked Questions
18. Customer service
- 18.1. What to do in case of hardware problems
- 18.2. Find the cause
- 18.3. Faults and possible causes
- 18.4. Do you need more help?
- 18.5. Driver support
19. Transport
20. Cleaning and care
21. Upgrading/modifying and repair
- 21.1. Notes for service technicians
22. Recycling and disposal
23. Information about the scope of delivery
- 23.1. Keyboard and mouse
- 23.2. WiFi USB
24. Legal Notice
25. Index

25 of 44

The second partition (D:\) is used for data backup and also contains drivers (D:\

Drivers) and utilities (D:\Tools) for your PC.

PLEASE NOTE!

Depending on the configuration of the computer,

there may be other partitions with different drive

designations. Therefore, it should be noted that the

drive designation “D:\” given here is an example and

may be different on your computer.

D:\Drivers

This directory contains copies of the drivers required for your PC. These files may be

required after a system restore.

D:\Tools

You will find additional programs and other documentation about your PC here.

D:\Recover

You will find the system recovery files here with which you can restore the computer

to the factory settings.

PLEASE NOTE!

Data loss!

In addition, you will find the start-up files for the

system restore tool, as well as the installation files for

Windows®, on other non-rewritable partitions. These

partitions are not visible and cannot be deleted.

9.2. Hot-swap mobile rack (optional)

An additional external hard drive can be connected to the computer via the hot-

swap mobile rack.

PLEASE NOTE!

Please bear in mind that only the mobile rack supplied

can be used.