Operation Manual
Table Of Contents
- 1. About these operating instructions
- 2. Safety information
- 3. Package contents
- 4. Setting up the PC
- 5. Connecting
- 5.1. Connecting the cables
- 5.2. Opening and closing the front cover (optional)
- 5.3. Connecting the monitor (optional)
- 5.4. Connecting an HDMI device (optional)
- 5.5. Connecting devices with mini HDMI connection (optional)
- 5.6. Touchscreen (optional)
- 5.7. Connecting USB devices (optional)
- 5.8. Connecting PS/2 devices (optional)
- 5.9. Connecting the audio output / headphones / speaker boxes
- 5.10. Connect microphone (optional)
- 5.11. Connecting audio input / recording source
- 5.12. Connecting the network (LAN)
- 5.13. Connecting S-ATA devices (optional)
- 5.14. Illumination (optional)
- 5.15. Connecting power supply
- 6. Starting up for the first time
- 7. Mouse
- 8. Keyboard
- 9. Hard drive
- 10. Optical drive (optional)
- 11. Card reader (optional)
- 12. Graphics system
- 13. Sound system
- 14. USB connection (optional)
- 15. Network operation
- 16. Settings
- 17. FAQ - Frequently Asked Questions
- 18. Customer service
- 19. Transport
- 20. Cleaning and care
- 21. Upgrading/modifying and repair
- 22. Recycling and disposal
- 23. Information about the scope of delivery
- 24. Legal Notice
- 25. Index

22 of 44
6.2.2. Processor overclocking using the OC switch on the front
cover
` If your computer has an OC switch on its front cover, you simply need to press
the switch in order to overclock the processor (the switch should click into posi-
tion).
` Restart your computer for the change to take effect. If you have launched the
MEDION® ERAZER® Control Center, a corresponding notification will appear on
the screen.
` To disable overclocking, press the switch again and restart your computer.
6.2.3. Making settings in the MEDION® ERAZER® Control
Center
After activating processor overclocking, you can make a number of settings using
the MEDION® ERAZER® Control Center.
For example, you can regulate the overclocking using the settings under CPU Ra-
tio/Tuning All Contacts. After making a change, you will need to restart your com-
puter.
PLEASE NOTE!
A warning will appear if you make settings that are not
supported by your computer.
The MEDION® ERAZER®Control Center is also a monitoring tool that shows you infor-
mation about the motherboard, memory and processor. The data provided is purely
for information purposes and cannot be changed.