Operation Manual
Table Of Contents
- 1. About these operating instructions
- 2. Safety information
- 3. Package contents
- 4. Setting up the PC
- 5. Connecting
- 5.1. Connecting the cables
- 5.2. Opening and closing the front cover (optional)
- 5.3. Connecting the monitor (optional)
- 5.4. Connecting an HDMI device (optional)
- 5.5. Connecting devices with mini HDMI connection (optional)
- 5.6. Touchscreen (optional)
- 5.7. Connecting USB devices (optional)
- 5.8. Connecting PS/2 devices (optional)
- 5.9. Connecting the audio output / headphones / speaker boxes
- 5.10. Connect microphone (optional)
- 5.11. Connecting audio input / recording source
- 5.12. Connecting the network (LAN)
- 5.13. Connecting S-ATA devices (optional)
- 5.14. Illumination (optional)
- 5.15. Connecting power supply
- 6. Starting up for the first time
- 7. Mouse
- 8. Keyboard
- 9. Hard drive
- 10. Optical drive (optional)
- 11. Card reader (optional)
- 12. Graphics system
- 13. Sound system
- 14. USB connection (optional)
- 15. Network operation
- 16. Settings
- 17. FAQ - Frequently Asked Questions
- 18. Customer service
- 19. Transport
- 20. Cleaning and care
- 21. Upgrading/modifying and repair
- 22. Recycling and disposal
- 23. Information about the scope of delivery
- 24. Legal Notice
- 25. Index

18 of 44
5.14.1. Select illumination style
` Press the illumination control once in order to switch on the lighting permanent-
ly.
` Press the control again to change the operating mode to pulsing light.
` Press the control again to switch off the lighting.
5.14.2. Colour selection
` Turn the illumination control to the right or left to select the required colour.
5.15. Connecting power supply
Finally, connect your PC and monitor to the power supply.
` Plug the mains cable into the socket and then connect it to the mains cable
socket on your PC.
Please observe the following safety information:
DANGER!
Risk of electric shock!
Even when the mains switch is off, some components
of the device are live.
` Pull the mains plug out of the socket to disconnect
your PC from the power supply and isolate the de-
vice entirely from voltage sources.
` The mains plug socket must be near the PC and
easy to reach.
` Only operate the PC on earthed, domestic power
supply sockets.
` Use only the mains cable supplied.
` For extra safety, we recommend using an overvolt-
age protection device to prevent your PC from sus-
taining damage from the mains supply as a result
of power surges or lightning strikes.
` The standard PC mains adapter has an on and an
off switch. These can be used to switch the PC on
and off. When the switch is at the OFF (0) setting,
no power is being supplied.
Do not start up your PC yet!
` Please read the next section first to find out what you need to look out for dur-
ing start-up.