Operation Manual
Table Of Contents
- 1. About these operating instructions
- 2. Safety information
- 3. Package contents
- 4. Setting up the PC
- 5. Connecting
- 5.1. Connecting the cables
- 5.2. Opening and closing the front cover (optional)
- 5.3. Connecting the monitor (optional)
- 5.4. Connecting an HDMI device (optional)
- 5.5. Connecting devices with mini HDMI connection (optional)
- 5.6. Touchscreen (optional)
- 5.7. Connecting USB devices (optional)
- 5.8. Connecting PS/2 devices (optional)
- 5.9. Connecting the audio output / headphones / speaker boxes
- 5.10. Connect microphone (optional)
- 5.11. Connecting audio input / recording source
- 5.12. Connecting the network (LAN)
- 5.13. Connecting S-ATA devices (optional)
- 5.14. Illumination (optional)
- 5.15. Connecting power supply
- 6. Starting up for the first time
- 7. Mouse
- 8. Keyboard
- 9. Hard drive
- 10. Optical drive (optional)
- 11. Card reader (optional)
- 12. Graphics system
- 13. Sound system
- 14. USB connection (optional)
- 15. Network operation
- 16. Settings
- 17. FAQ - Frequently Asked Questions
- 18. Customer service
- 19. Transport
- 20. Cleaning and care
- 21. Upgrading/modifying and repair
- 22. Recycling and disposal
- 23. Information about the scope of delivery
- 24. Legal Notice
- 25. Index

6 of 44
2.2. Operating safety
Read this section carefully and follow all instructions given. The
instructions will help you to operate your PC reliably and help
increase its service life.
Liquids penetrating the device may impair the electrical
safety of the product.
` Avoid exposing the device to water droplets or spray and
do not place anything containing water, e.g. vases, on the
device.
The slots and openings on the PC are for ventilation purpos-
es.
` Do not cover these openings as this could cause the de-
vice to overheat.
` When setting up the PC make sure that it has a minimum
clearance of 20cm on all sides.
` Do not insert anything into the PC through the slots and
openings.
This could result in an electrical short circuit, an electric
shock or even ignite a fire which will damage your PC.
There is a risk of electric shock or fire when the PC casing is
open.
` Never open the casing of the PC!
` Never use the PC when the casing is open.
There is a risk of electric shock or fire when the mains adapt-
er is open.
` Never open the mains adapter!
` Never manipulate the mains adapter or live components!
The optical drives (CDRW, DVD, DVD-RW) constitute class 1
laser equipment.
` Do not remove the drive cover as invisible laser radiation
can escape.