Instruction manual

18 of 62
Telephone: [phone]
Internet: www.medion.com.au
After Sales Support
5.8. LAN Connection
Product Diagram position: K
Your PC is equipped with a network connection, in order to prepare it for network
operation.
The network cable usually has two RJ45 plugs so that it is unimportant which plug
is connected to which jack.
 Connect the one plug of the cable to the PC jack.
 Connect the other plug to the other PC or hub/switch.
For further information refer to chapter “The network”.
5.9. Connecting the Power Supply
Product Diagram position: J, N
When you have made all the connections, establish the power supply by
connecting the mains adapter supplied with the PC.
 Link the 3-pin mains adapter plug of the mains cable with the corresponding
socket to the mains adapter.
 Plug the device plug of the mains adapters into the DC IN mains plug socket on
the back side of the PCs.
 Plug the mains plug on the mains cable into a 230 V ~ 50 Hz wall socket.
PLEASE NOTE!
The power supply unit has an On/Off switch. When the switch is Off (0)
no power is being consumed.
The socket must be close to the PC and easy to access.
Do not start your PC yet!
First, read the following section to find out what you need to know in order to get
started.
8320 PC Win8 Aldi AUS Final Content MSN 2005 4011 rev1.indd 188320 PC Win8 Aldi AUS Final Content MSN 2005 4011 rev1.indd 18 09.01.2013 09:18:0409.01.2013 09:18:04