Technical data

DVD-RECORDER 80032 35
PREPARING DISCS FOR RECORDING
Edit Title Name
• Move cursor to “Edit Title Name”, press ENTER key, a Virtual keyboard will
appear.
• Move cursor using direction keys and to select desired letter, press
ENTER key to input. Title Name contains a maximum 14 letters.
• After finishing your title, move cursor to “Done” and press
ENTER key to
complete. To edit your title move cursor to “Clear” then press
ENTER key
to clear input title name. Move cursor to “Delete” or “BS” icon then press
ENTER key for erasing inputted letter(s). To cancel , move cursor to “Can-
cel”, then press
ENTER key to abort inputting.
Note
“Delete” and “BS” work in different ways, using delete to erase letter(s) from
the beginning, and BS (backspace) to erase letters from the tail.
Erase Title (DVD+RW only)
Move cursor to “Erase Title” menu, Press ENTER key to confirm, and wait for
15 to 18 seconds for the title to erase.
During playback, press EDIT key to enter edit menu:
Insert Chapter
If “Auto Chapter” at Record menu has been activated, every 5~15 minutes
(depends on setting) will divide into a chapter. But if users wish to divide chap-
ters at specific points in a title, users can use Insert Chapter function here.
• During title playback, press EDIT on remote control to show edit menu.
• Choose Insert Chapter and press ENTER key to add one chapter. Repeat
above to add more chapters.
Delete Chapter
Chapter mark can be deleted after recording. While a movie is playing, press
EDIT on remote control to show edit menu, choose “Remove Chapter”, and
you can remove current chapter mark of a title.
Note:
If DVD+R has not been finalized, Insert/Remove Chapter Mark step
can be made.