Technical data

PREPARING DISCS FOR RECORDING

Recording from a DV Camcorder

Connect the red, yellow, and white AV output connectors from your DV cam-

corder to the AV input connectors on the front of your DVD recorder.

• Place an initialized DVD+R or DVD+RW disc in the DVD recorder.

• Turn on the DV camcorder and switch it to “VCR” mode.

• Press MONITOR on the remote to switch to external input mode.

• Press SOURCE to select the source for your recording .

• Press RECORD to begin recording.

• Press STOP to stop recording. Please wait while the screen displays

“WAIT.” When “WAIT” disappears from the screen, your recording is done.

• Press MONITOR to switch to DVD mode. The recorded title will appear on

the screen. Press

ENTER to view your recorded video.

Note:

Recording will stop automatically if there is no signal from the DV camcorder.

All recorded signals must be in DVD-SD format.

Date and time information can’t be recorded from a DV camcorder.

You can’t record copy-protected discs or one-time duplicable discs.

Editing Discs

Under disc title menu, press EDIT key to enter edit menu:

Protect and Unprotect Title

Protect and unprotect selected disc title. Move cursor to “Protect Title” menu,

press

ENTER key to proceed to protect title. To unprotect a title, follow the

previous step.

Protect and Unprotect disc

Protect and unprotect the entire disc. Move cursor to “Protect Disc” menu,

press

ENTER key to proceed protect disc. To unprotect a disc, follow the pre-

vious step.

Make Compatible (DVD+R only)

Use this feature to make a DVD+R disc playable on other DVD video players.

Note that after this procedure, the DVD+R disc cannot record any new con-

tents.

Note:

We can’t guarantee a DVD+R/RW disc is playable on every DVD

player. Check the instruction manual of the DVD player in advance to

confirm which kind of disc can be played.

Play Full Title

If there is a hidden chapter in title, this setup can view all the contents.