Technical data

PREPARING DISCS FOR RECORDING

ring which the TV screen shows READING. After the procedure is complete,

the TV screen shows a blank title and indicates the recording capacity is

100%.

For more information on erasing discs or portions of discs, see "Editing Discs",

p. 34.

Scheduled Disc Recording

Scheduling a Recording

You can schedule up to 8 different programs with your DVD recorder.

Make sure that the correct time and date are set on your DVD recorder.

Place an initialized DVD+R or DVD+RW disc in the DVD recorder.

Press

SETUP on your remote control to enter the setup menu. Use the

buttons to select the “Record” menu, then press the button to enter the

menu, next use the buttons to select “Schedule Record”, finally press the

button to enter the menu.

Use the buttons to select the first available record program (ID # 1-8).

• Press the button to schedule a recording for the selected ID #.

• Set the date for your recording: Use the buttons to choose between

Wkly Sun, Wkly Sat, Wkly Fri, Wkly Thu, Wkly Wed, Wkly Tue, Wkly Mon,

Daily, Mon-Fri or Once. If once is selected use the buttons to move

the cursor and #’s 0-9 to input the date (mm/dd/yy)

• Set the start time for your recording: Use the buttons to move the cur-

sor and either the buttons or #’s 0-9 to set the time. Next, use the

buttons to select AM or PM.

• Set the stop time: Use the buttons to move the cursor and either the

buttons or #’s 0-9 to set the time. Next, use the buttons to select

AM or PM.

• Set the Mode (quality): Use the buttons to move the cursor to the mode

field, and then use the buttons to select the desired mode. More infor-

mation about quality levels: see "Record Quality", p. 27.

• Set the source: Use the buttons to move the cursor to the source field,

and then use the buttons to select the source for your recording.