Technical data

SETTINGS AVAILABLE IN THE SETUP MENU

Add/Del Channel

Allows you to add/delete specific channels. Move cursor to desired channel;

press the

ENTER key once to add the channel and again to delete the channel.

You can also access this menu by pressing the

PROGRAM button.

Screen Format

4:3 Letter Box

Select this setting to display a 16:9 format film on a conventional 4:3 televi-

sion. The picture will be displayed full-width, with black bars on top and bot-

tom.

4:3 Pan Scan

Choose this setting to display transmissions in conventional 4:3 format on a

4:3 television. Transmissions in 16:9 format will be displayed full-height (wit-

hout black bars) but with the sides cut off, however the sidebars of the image

will be cropped to fit your screen.

16:9 Wide

This is the setting for output on a wide-screen television in 16:9 format.

Audio menu

Use this menu to ensure the audio output format is compatible with connected

devices (amplifier/receiver or TV set).

Dolby Digital

PCM: Recorder can output PCM data and play the same audio format as on

CDs. Additionally, 2-channel analog audio will output from the amplifier’s au-

dio output jacks.

Bitstream: Recorder outputs raw data of Dolby® Digital soundtracks

DTS

PCM: Recorder can output PCM data and play the same audio format as on

CDs. Additionally, 2-channel analog audio will output from the amplifier’s au-

dio output jacks.

Bitstream: Recorder outputs raw data of DTS® soundtracks

MPEG

PCM: Recorder can output PCM data and play the same audio format as on

CDs. Additionally, 2-channel analog audio will output from the amplifier’s au-

dio output jacks.

Bitstream: Recorder outputs raw data of Dolby® Digital soundtracks

Sampling Freq.

This DVD recorder provides selections of 48KHz and 96KHz