Technical data

KEY FUNCTIONS

Controls on the recorder or on the remote control

Buttons on the front panel and

keys on the remote control - see

fold-out.

You can use the front panel buttons to control the main functions of your DVD

recorder. They can be used to play discs, start a recording, interrupt it and stop

it, skip backwards and forwards and select programmes.

In addition to these basic functions, the remote control has further controls,

giving access to the full functionality of your DVD recorder. In particular, it is

only by means of the remote control that you can navigate the on-screen me-

nus.

Standby/On

Standby mode

Use the STANDBY/ON button on the front panel to turn the recorder on.

The display will briefly show HELLO and Reading. The recorder will now attempt

to read the disc.

- If no disc is inserted, the display will show NO DISC.

- If a disc has been inserted, the display will show the disc type.

Pressing the button again will return the recorder to standby mode and the

time of day will be shown on the display.

Insert a disc

Ensure that there is 15 cm free space in front of the recorder so that the disc

drawer can open fully.

• With the recorder switched on, press

OPEN/CLOSE. The display will show

OPEN.

• Place a disc with the label side upwards in the disc drawer. Ensure that the

disc is centred in the locating depression, so that it does not jam when the

drawer closes.

• Press the

OPEN/CLOSE button. The disc drawer will close. The display will

show CLOSE and, after a few seconds, Reading.

If the disc is a DVD, playback will normally start automatically after a few se-

conds. The indication in the display depends on the type of disc (DVD, Video

CD, Music CD, MP3 or JPEG CD) and its format.

You may need to press

PLAY or an on-screen menu may appear in which you

must make a selection with the navigation keys.

In this manual, the recorder is described by reference to the keys of the remote control,

as these include all functions of the recorder (with the exception of the mains switch). If

reference is made to the buttons on the recorder, this will be stated explicitly.