Installation Guide

Contact us : For support & assistance, please feel free to contact us below.
E-Mail: [e-mail] | Web: www.medinahpower.com | Ph: [phone]
LED Troffer Retrofit
Installation Instructions
MEDINAH
POWER
WARNING: Risk of fire or electric shock. The electrical rating
of these products are 120-277 Vac, the installer must determine
whether they have 120-277 V at the luminaire before installation.
WARNING: Risk of fire or electric shock. LED Retrofit Kit installation
requires knowledge of luminaires electrical systems. If not qualified,
do not attempt installation. Contact a qualified electrician.
WARNING: Risk of fire or electric shock. Install this kit only in the
luminaires that have the construction features and dimensions
shown in the photographs and/or drawings.
WARNING: Risk of fire or electric shock. Luminaire wiring and
electrical parts may be damaged when drilling for installation of
LED retrofit kit. Check for enclosed wiring and components.
WARNING: To prevent wiring damage or abrasion, do not expose
wiring to edges of sheet metal or other sharp objects.
INSTALLATION INSTRUCTIONS AND MARKING:
Instructions shall be provided with the kits which indicate proper assembly and wiring.
Each kit shall be provided with installation. Instructions as shown in ILL. 1 or ILL. 1A or ILL. 1B.
Do not make or alter any open holes in an enclosure
of wiring or electrical components during kit installation.