User's Manual

4
the camera to malfunction or prevent recording:
•
Dropping or hitting the camera against a hard surface.
•
Exerting excessive force on the lens or the monitor.
Once the smart card reader slot cover is removed, the camera is not dust
resistant, splash resistant, or waterproof. Avoid using the camera in places
with excessive dust or sand, or where water can come into contact with the
camera.
Avoid using the camera under the following conditions, which present
the risk that sand, water, or foreign material may enter the camera
through the lens or gaps around buttons. Be especially careful because
these condition may damage the camera, and such damage may not be
repairable:
•
Operate in extremely dusty or sandy places
•
Exposing the camera to rain or moisture
Condensation (When the lens or the monitor is fogged up)
Condensation may occur when the camera is exposed to sudden
changes of temperature or humidity. Avoid these conditions because
they may soil the lens or the monitor, cause mold, or damage the
camera.
If condensation does occur, turn off the camera and wait for about two
hours before using it. Once the camera adjusts to the surrounding
temperature, the fogging will clear naturally.
No compensation for missed shots
We cannot compensate for missed shots if technical problems with the
camera or card prevent recording.
Usage cautions and notes
When in use
The camera may become warm if used for long periods of time,
but this is not its fault.
Keep the camera as far away as possible from electromagnetic
equipment (such as microwave ovens, TVs, video games, etc.).