User's Manual

3
Preparations
Before use
Prior to installation and start-up of the Horus Scope MPD 100 and SC 3,
carefully read the user manual. As with all technical devices, the proper
function and safety operation of this device depend on the user complying
with the safety recommendations described in these operating instructions.
In addition, please make sure that it does not appear damaged or broken.
If there are breaks on the outer casing or other visual defects, please
contact the manufacturer or a certified service facility.
Caution: Federal law restricts this device to sale by or on the order of a
healthcare professionals, and other countries shall be follow.
Indication for use
Intended for qualified healthcare professionals who trained in its use.
The device is intended to be used in hospital or clinic.
The device may be used on any human group.
The device does not provide a diagnosis or therapy.
The clinical benefit is for healthcare professionals, helping deliver state-of-
the-art care to their patients.
Contraindications
This instrument must not be used for the following patients:
•
Patients who are hypersensitive to light.
•
Patients who recently underwent photodynamic therapy (PDT).
•
Patients taking medication that causes photosensitivity.
•
Patients with a history of migraines.
•
Patients with a history of photosensitive epilepsy.
•
Patients with any kind of disease which could be induced by flash or
strong light.
Camera handling
Protect the camera from excessive vibration, force, or pressure.
Avoid using the camera under the following conditions, which may
damage the lens, the monitor, or the control unit and may also cause
Preparations