Owner Manual

CONTROL PANEL

HOW TO USE

BEFORE TURNING THE UNIT ON

• Take the air purifier out of the box and remove the clear protective plastic bag.

• Place the air purifier on a firm, level surface.

• Plug the power cord into a standard AC outlet.

POWER BUTTON AND FAN SPEED SETTINGS

• To turn the air purifier on, press the power

button.

• This air purifier has 3 fan speed settings: low (1), medium (2), and high (3). The higher the fan speed

setting, the faster the air will be purified. To select or change fan speed, press the fan speed button

until the desired setting is reached.

TIMER

Press the timer

button until the desired timer setting is lit on the display. The timer

button will cycle

through the following settings: 1 hours, 2 hours, 4 hours, 8 hours and off. To cancel the timer at any time,

press the timer button until all timer LEDs are off. The air purifier will run continuously when the timer

function is off.

Press the dimmer button to change the backlight to desired brightness, there are 4 brightness levels

to change for all buttons' backlight LEDs. The green backlight will turn off for 1 second when the dimmer

button been pressed.

DIMMER

Press the child-lock button and hold for 3 seconds, all functional buttons will be locked. Press and

hold again the child-lock button for 3 seconds, all functional buttons will be un-locked.

CHILD-LOCK BUTTON