V2.0 Read this manual before using. Operate the unit according to the instructions provided. Keep this for future reference.
TABLE OF CONTENTS 4 Belore Use Open and Replace New Filter Control Panel Functions Turning Off Air Purifier Adjustment of Fan Speeds 7 9 10 10 10 11 11 11 11 12 12 13 15 16
In order to avoid damage to you, others or property, follow the safety precautions. If the power cord or unit is out of order, contact Medify Customer Service immediately. Clean air outlet This is a 110v unit. It is NOT made for 220v use. Plugging into a 220v outlet will burn out the motor and circuits and the unit will no longer work. Only use with a 110v outlet Do not use air purifier in a room that is cooking with oils and grease that may clog the filters Keep machine dry.
Open and Replace back cover 1h,2h,4h,8h Timer switch Child Lock Indicator Filter Replacement Indicator Sleep Medium IONIZER Indicator using the top buttons SLEEP CHILD-LOCK TIMER IONIZER IONIZER button 10 inch To ensure proper air circulation, leave at least 10” space between wall or furniture and back air intake.
4.Remove plastic packaging from the new filter before installing into the air purifier. Install filter The 3 stage Medify filter is a one-piece filter for higher performance. Remove by pulling on the small tab at top. When reinstalling, make sure to push back in and make sure it is in snug for maximum performance. 2.Press top buttons in the back cover 5.Place new filter into the air purifier with white side facing out to you. The tab at top of filter should be facing you.
Control panel Second step:True HEPA h13 Filter Fourth step: SLEEP CHILD-LOCK Removes large particles such as: Dust, Dander, Hair and others Plugging In 2.True HEPA h13 Filter 4.Ionizer HEPA H13 is a higher Grade of HEPA than Hepa Type or True HEPA. Produces negative ions to IONIZER Turning On The Air Purifier Press ON/OFF button and unit will turn on. Machine starts to work in low speed. Press the button again, machine stops and is in standby mode. positive particles. purifier will beep.
SLEEP Unplug air purifier before cleaning the unit. Do not use excess water to clean the unit. Use a soft cloth or a soft moist cloth to wipe down unit. Do not use cleaners or chemicals on the air purifier at any time. Press speed button to choose your speed. Options are: 1,2,3 and Sleep Mode. Cleaning Your Air Purifier Ionizer Mode Ionizer is an On/Off function. You can choose to leave it on or off at your discretion. When Ionizer is on, the indic light will be lit.
4.Remover old filter from the unit. Pull on the tab at the top to remove. 1.Indicator Lights will show the user if filters need to be replaced. 2.Make sure to unplug before changing filter 5.Remove plastic packaging from the new filter before installing into the air purifier.Place new filter into the air purifier with white side facing out to you. The tab at top of filter should be facing you. Reminds user when filter needs replacement. Indicator Icon will become lit when filter needs to be changed. 3.
7.Warranty and service every six(6)months of after 3,000 hours of use. The filter replacement indicator will let you know when it is time to change.
