Owner Manual

User Manual
User Manual
Manual adjustment of fan
Press SPEED button to choose air
speed 1, 2, 3, 4. In AUTO mode,
unit will choose fan speed based
on the air quality.
Press ANION button. Unit will sound and
indicator light of Anion will be on. Press
ANION button again and the unit will go
out of Anion mode. The indicator light for
Anion will be off. When filter replacement
indicator is on, user needs to replace the
filter and press ANION button for 3
seconds to reset. Then fan speed indicator
light will stop flashing.
ANION mode
Press timer button and choose
hour options:
1, 2, 4, 8 or no timer.
In this mode, none of the function keys
can be used or changed. (Except the child
lock function). To turn on the child lock,
hold the button down for 3 to 5 seconds.
To turn off the child lock function, hold
the button down for 30 to 45 seconds.
THIS FEELS LIKE A LONG TIME, BUT IS
DONE PURPOSELY SO PEOPLE CAN NOT
UNLOCK IT UNLESS YOU WANT IT
UNLOCKED.
Please make sure to pull out power plug
before cleaning the unit. Do not
immerse machine in water or any other
liquid. Do not use abrasive, corrosive or
flammable products to clean any parts
of the unit. The unit uses composite
filters, so filters cannot be washed.
1. Use soft brush, or cloth, to
clean intake and outlet of air
quality sensor.
TIMER mode
Child-lock function
6. Maintenance and Cleaning
2. Disassemble the cover of air
quality sensor.
3. Use a dry swab to clean the
air quality sensor, air intake and
air outlet.
4. Reinstall the cover of air
quality sensor.
Clean air quality sensor every two-month
to ensure best performance. Clean often
if machine works in dusty environment.
Clean the air purifier regularly to prevent
the dust accumulation.
1. Use soft and dry clothes to remove the
dust from the air purifier.
2. Use soft and dry clothes to clean the
outlet and inlet of the air purifier.
Clean the air purifier
Clean the air quality sensor
13
14
Under AUTO mode, if room
lighting is dark, unit will enter
SLEEP mode after 3 minutes.
Indicator lights will turn off
except power light. Fan speed
and noise level will change to
lowest setting. When lighting in
the room turns on for 3 minutes,
unit will exit SLEEP mode.
SLEEP mode
Attention
The air quality sensor may accumulate
condensation. If this happens the air quality
sensor even in a good air room may show
poor air quality. Please make sure air quality
sensor is clean and dry to perform properly.