Owner Manual

User Manual
User Manual
4. Filter Purification: Four Steps
First step: Pre filter
Second step: H13 HEPA filter
Third step: Activated carbon filter
Fourth step: Anion generator
1. Pre-Filter
2. HEPA H13 Filter
3. Activated Carbon Filter
4. Anion Generator
Removes larger particles
including hair, fibers, dander,
and others.
HEPA H13 is a medical grade
filter. This removes 99.97% of
particles down to 0.3 microns as
well as PM2.5 particles such as,
smoke, pollen, dust mites and
others.
Absorbs odors, harmful VOCs,
and other toxic substances such
as formaldehyde.
Produces negative ions to
neutralize positively charged
particles such as dust, bacteria,
mold spores, pollen, animal
dander and other airborne
positive particles. These particles
will be absorbed by integrated
discharge device.
5. How to Use
Description of control panel functions
11
12
1. Anion button / Filter
Replacement Reset
2. SLEEP Button
3. TIMER Button (1, 2, 4, 8 hours)
4. AUTO Speed Button / Child-lock
5. Fan Speed Button (1, 2, 3, 4)
6. ON/OFF Button
7. Air Quality Indicator Light
8. Digital Display of PM2.5
Plug in
After plugging in, the air
purifier will beep. Indicator
lights will flash twice. Then
indicator lights will turn off.
Turn on the air purifier
Press ON/OFF button. Unit will start in
AUTO mode, with indicator light on.
The air quality sensor will detect the
air quality automatically after 2
minutes. Unit needs tome to calibrate
and calculate air quality properly.
Press ON/OFF button again to turn off
the unit. Unit will beep, power light
will flash, then pull out plug.