Manualshelf

User's Manual

ManualsBrandsMedical Data Electronics ManualsElectronicsMedical Telemetry Transmitter
12345678910
6
d. Touch YES.
Message #2
Patient is currently Admitted. Confirm Assigning the Angel Transmitter to
Patient: <Name> ID: <ID> Location: <Location> Channel: <Channel>?
a. Touch YES if this is desired patient (touching NO will allow you to discharge patient
and admit new patient as described in Message #1).
b. After programming completes successfully, the following message is displayed:
Programming Complete
Remove the Angel Transmitter from the Programming
Port and write the Patient ID on the Angel Transmitter.