User's Manual

Programming the Angel MP

Programming the Angel MP Telemetry Transmitter

1. Remove the battery cover to expose the programming tab (turn knob to OFF position to

remove).

2. Remove the protective sleeve which covers the programming tab contacts.

3. Insert tab into programming port on front of Vision base (see Illustration). Once transmitter

is inserted in programming port, the system will automatically provide instructions for

programming.

4. Follow on screen programming instructions.

5. After transmitter is programmed, remove from programming port and replace the protective

sleeve over the programming tab contacts.

6. When ready to begin patient monitoring, refer to the Power Up section later in this manual.