Manualshelf

User Manual

ManualsBrandsMedical Data Electronics ManualsElectronicsMedical Transmitter, DS-1
12345678910
9
Recording Multiple Waveforms
1.
Touch
RECORD
.
2.
Touch
SELECT WAVES
.
3.
Touch each of the specific waveforms desired for this recording (maximum of 3).
Generate Continuous Recordings
1.
Touch and hold
RECORD
key until
RECORD
changes to
CONTINUOUS RECORD
.
2.
Touch display tile for patient requiring continuous recording.
Cancel Recordings
1.
Touch
RECORD
.
2.
Touch
CANCEL RECORD
or
CANCEL ALL…
Silence Alarm Tones
1.
Touch
ALARM SUSPEND
.
2.
Touch anywhere on display tile for patient in alarm.
NOTE:
Patient(s) in alarm will have a flashing blue bar at top of their
display area. Messages concerning patients’ current alarm status will also
be displayed in this patient header area.
Technical violations such as check leads and low battery will NOT include
the blue bar and will have low tone every 4 seconds with a FLASHING
yellow message in patient header. These tones are suspended in same
manner as parameter violation.